Install Work Arm Assembly

  1. Slide pivot shaft into the work arm linkage assembly. Place spacers onto the pivot shaft.
  2. Install screws and washers securing the work arm linkage assembly to the main frame assembly using an 8mm Allen wrench.
    Item Description Qty.
    1 Work Arm Linkage Assembly 1
    2 Main Frame Assembly 1
    3 Pivot Shaft, 25mm DIA x 8.25" 1
    4 Spacer, .425" 2
    5 Washer, Flat 3/8" 2
    6 Screw, M10 x 1.5, 30mm 2

    Tighten hardware to 30-39 in-lb (3.4-4.4 Nm).

  3. Slide pivot shaft into the work arm assembly. Place spacers onto the pivot shaft.
  4. Pull detent pin out on the work arm linkage assembly and slide the work arm assembly up into position.
  5. Install screws and washers securing the work arm assembly to the work arm linkage assembly using an 8mm Allen wrench.
    Item Description Qty.
    1 Work Arm Assembly 1
    2 Work Arm Linkage Assembly 1
    3 Pivot Shaft, 25mm DIA x 10.331" 1
    4 Spacer, .425" 2
    5 Washer, Flat 3/8" 2
    6 Screw, M10 x 1.5, 30mm 2

    Tighten hardware to 30-39 in-lb (3.4-4.4 Nm).

Parent topic: Assembly Procedure