Component and Hardware List
Tower Components
| Item | Description | Qty. |
|---|---|---|
| 1 | Tower Frame | 1 |
| 2 | Guide Rod | 2 |
| 3 | Increment Weight Guide Rod | 2 |
| 4 | Rear Shroud | 1 |
| 5 | Label, Weight Stack | 1 |
| 6 | Tube Cap | 2 |
| 7 | Top Cap | 1 |
Tower Hardware Kit
| Item | Description | Qty. |
|---|---|---|
| 1 | Tower Hardware Kit, OP-MP | 1 |
| 2 | Hole Plug, 8.7 mm | 2 |
| 3 | Hole Plug, ½" | 2 |
| 4 | Grommet | 2 |
| 5 | Shroud Retainer | 14 |
| 6 | Bushing, .235" | 4 |
| 7 | Screw, 8 x ¾" Phillips | 2 |
| 8 | Screw, M10 x 1.5, 55mm | 2 |
| 9 | Nut, M10 x 1.5, Hex Nylock | 2 |
| 10 | Nut, ¼" Nylock | 2 |
| 11 | Washer, Flat ¼" ID | 2 |
| 12 | Washer, Flat 3/8" ID | 4 |
| 13 | Weight Stack Cushion | 2 |
| 14 | Increment Weight Bumper | 1 |
| 15 | Spring | 2 |
| 16 | Guide Rod Housing | 2 |
| 17 | Pulley, 3.5" OD | 1 |
| 18 | Pulley, 4.5" OD | 1 |
Optional: Front Shroud Kit Components
| Item | Description | Qty. |
|---|---|---|
| 1 | Front Shroud, Left | 1 |
| 2 | Front Shroud, Right | 1 |
| 3 | Bottom Cap | 1 |
Optional: Front Shroud Kit Hardware Kit
| Item | Description | Qty. |
|---|---|---|
| 1 | Front Shroud Hardware Kit | 1 |
| 2 | Screw, M4.2 x 0.7, Phillips | 6 |
| 3 | Screw, M10 x 1.5, 20mm | 2 |
| 4 | Washer, Flat 3/8" | 2 |
| 5 | Grommet, Shroud Retainer | 6 |
Components
| Item | Description | Qty. |
|---|---|---|
| 1 | Main Frame Assembly | 1 |
| 2 | Lower Cross Brace | 1 |
| 3 | Upper Cross Brace | 1 |
| 4 | Lower Pulley Assembly | 1 |
| 5 | Work Arm Assembly | 1 |
| 6 | Work Arm Linkage Assembly | 1 |
| 7 | Seat Assembly | 1 |
| 8 | Front Seat Linkage Assembly | 1 |
| 9 | Rear Seat Linkage Assembly | 1 |
| 10 | Seat Back Assembly | 1 |
| 11 | Seat Back Linkage Assembly | 1 |
| 12 | Gas Shock | 1 |
| 13 | Back Pad | 1 |
| 14 | Seat Pad | 1 |
| 15 | Cable | 1 |
| 16 | Front Cap | 1 |
| 17 | Head Plate Assembly | 1 |
| 18 | Increment Weight Assembly | 1 |
| 19 | Multilingual Label Sheet | 1 |
| 20 | Weight Stack
(Weight Plates) |
1
(12) |
Hardware Kit
| Item | Description | Qty. |
|---|---|---|
| 1 | Hardware Kit, OP-MP | 1 |
| 2 | Washer, Flat 3/8" | 46 |
| 3 | Nut, M10 x 1.5, Hex Nylock | 9 |
| 4 | Nut, M10, Hex Jam | 1 |
| 5 | Nut, M16, Hex Jam | 1 |
| 6 | Screw, M6, HCS, 50mm | 4 |
| 7 | Screw, M10 x 1.5, 25mm | 11 |
| 8 | Screw, M10 x 1.5, 30mm | 19 |
| 9 | Screw, M10 x 1.5, 55mm | 1 |
| 10 | Screw, M10 x 1.5, 110mm | 2 |
| 11 | Screw, M10 x 1.5, 120mm | 4 |
| 12 | Bushing, .235" | 2 |
| 13 | Spacer, .425" | 4 |
| 14 | Hole Plug, 1" | 5 |
| 15 | Rod End Bearing | 1 |
| 16 | Increment Weight Cap, LBS (7.5) | 1 |
| 17 | Increment Weight Cap, KG (3.75) | 1 |
Shaft Kit
| Item | Description | Qty. |
|---|---|---|
| 1 | Shaft Kit, OP-MP | 1 |
| 2 | Pivot Shaft, 19mm DIA x 93.9mm | 3 |
| 3 | Pivot Shaft, 19mm DIA x 119.925mm | 1 |
| 4 | Pivot Shaft, 19mm DIA x 154.5mm | 1 |
| 5 | Pivot Shaft, 19mm DIA x 195.7mm | 1 |
| 6 | Pivot Shaft, 25mm DIA x 8.25" | 1 |
| 7 | Pivot Shaft, 25mm DIA x 10.331" | 1 |
