Symbio™ Console

Service Manual

Author:

Chapter 1: Safety
- 1.1: Safety Instructions
  - 1.1.1: ANATEL Compliance Information - Brazil
- 1.2: Immobilization Method - Treadmill Only
Chapter 2: Introduction
- 2.1: Using this Manual
- 2.2: Customer Support Contact Information
  - 2.2.1: Serial Number Location
- 2.3: Online References
- 2.4: Related Products
Chapter 3: Maintenance
- 3.1: Preventive Maintenance Tips
- 3.2: Approved and Compatible Cleaners
- 3.3: Preventive Maintenance Schedule
Chapter 4: Theory of Operation
- 4.1: Main Board, Tablet PCBA (PCB-001)
- 4.2: Fitcore PCBA (PCB-002)
- 4.3: WLAN / Bluetooth Board (PCB-003)
- 4.4: ANFC Board (PCB-004)
- 4.5: ANT+ Board (PCB-005)
- 4.6: Polar Board (PCB-006)
- 4.7: Headphone Jack Board (PCB-007)
- 4.8: User USB Port (PCB-008)
- 4.9: Digital Tuner Board Assembly (PCB-009)
- 4.10: STB-SYNC HDMI Extender Solution (PCB-010)
- 4.11: RFID Module (PCB-011)
- 4.12: Apple Authentication Board (PCB-012)
- 4.13: LED Logo Assembly (PCB-014)
- 4.14: HDMI Set-Top Box Connector Kit Support
Chapter 5: How To's
- 5.1: Knowledge Base
- 5.2: Non-Replaceable Parts
- 5.3: Ant+ Board Replacement
  - 5.3.1: Disconnect Power Source
  - 5.3.2: Remove Console
  - 5.3.3: Remove Rear Cover
  - 5.3.4: Remove Ant+ Board
  - 5.3.5: Install Ant+ Board
  - 5.3.6: Install Rear Cover
  - 5.3.7: Install Console
  - 5.3.8: Plug Cables into Console
  - 5.3.9: Complete installation
- 5.4: Apple Authentication Board Replacement
  - 5.4.1: Disconnect Power Source
  - 5.4.2: Remove Console
  - 5.4.3: Remove Rear Cover
  - 5.4.4: Remove Apple Authentication Board
  - 5.4.5: Install Apple Authentication Board
  - 5.4.6: Install Rear Cover
  - 5.4.7: Install Console
  - 5.4.8: Plug Cables into Console
  - 5.4.9: Complete installation
- 5.5: Backlight Board Replacement
  - 5.5.1: Disconnect Power Source
  - 5.5.2: Remove Console
  - 5.5.3: Remove Rear Cover
  - 5.5.4: Remove Backlight Board
  - 5.5.5: Install Backlight Board
  - 5.5.6: Install Rear Cover
  - 5.5.7: Install Console
  - 5.5.8: Plug Cables into Console
  - 5.5.9: Complete installation
- 5.6: Console Rear Cover Replacement
  - 5.6.1: Disconnect Power Source
  - 5.6.2: Remove Console Rear Cover
  - 5.6.3: Install Console Rear Cover
  - 5.6.4: Complete installation
- 5.7: CSAFE Cover Replacement
  - 5.7.1: Disconnect Power Source
  - 5.7.2: Remove Console
  - 5.7.3: Remove Rear Cover
  - 5.7.4: Remove CSAFE Cover
  - 5.7.5: Install CSAFE Cover
  - 5.7.6: Install Rear Cover
  - 5.7.7: Install Console
  - 5.7.8: Plug Cables into Console
  - 5.7.9: Complete installation
- 5.8: Headphone Jack Cable Replacement
  - 5.8.1: Disconnect Power Source
  - 5.8.2: Remove Console
  - 5.8.3: Remove Rear Cover
  - 5.8.4: Remove Headphone Jack Cable
  - 5.8.5: Install Headphone Jack Cable
  - 5.8.6: Install Rear Cover
  - 5.8.7: Install Console
  - 5.8.8: Plug Cables into Console
  - 5.8.9: Complete installation
- 5.9: Headphone Jack Replacement
  - 5.9.1: Disconnect Power Source
  - 5.9.2: Remove Option Panel Assembly
  - 5.9.3: Remove Headphone Jack
  - 5.9.4: Install Headphone Jack
  - 5.9.5: Install Option Panel Assembly
  - 5.9.6: Complete installation
- 5.5.1: Disconnect Power Source
- 5.5.2: Remove Console
- 5.5.3: Remove Rear Cover
- 5.5.4: Remove Life Fitness Logo Backlight Board
- 5.5.5: Install Life Fitness Logo Backlight Board
- 5.5.6: Install Rear Cover
- 5.5.7: Install Console
- 5.5.8: Plug Cables into Console
- 5.5.9: Complete installation
- 5.10: NFC PCB Replacement
  - 5.10.1: Disconnect Power Source
  - 5.10.2: Remove Console
  - 5.10.3: Remove Rear Cover
  - 5.10.4: Remove NFC Board
  - 5.10.5: Install NFC Board
  - 5.10.6: Install Rear Cover
  - 5.10.7: Install Console
  - 5.10.8: Plug Cables into Console
  - 5.10.9: Complete installation
- 5.11: Option Panel Shroud Replacement
  - 5.11.1: Disconnect Power Source
  - 5.11.2: Remove Console
  - 5.11.3: Remove Rear Cover
  - 5.11.4: Remove Option Panel Shroud
  - 5.11.5: Install Option Panel Shroud
  - 5.11.6: Install Rear Cover
  - 5.11.7: Install Console
  - 5.11.8: Plug Cables into Console
  - 5.11.9: Complete installation
- 5.12: Polar PCB Replacement
  - 5.12.1: Disconnect Power Source
  - 5.12.2: Remove Console
  - 5.12.3: Remove Rear Cover
  - 5.12.4: Remove Polar Board
  - 5.12.5: Install Polar board
  - 5.12.6: Install Rear Cover
  - 5.12.7: Install Console
  - 5.12.8: Plug Cables into Console
  - 5.12.9: Complete installation
- 5.13: RFID PCB Replacement
  - 5.13.1: Disconnect Power Source
  - 5.13.2: Remove Console
  - 5.13.3: Remove Rear Cover
  - 5.13.4: Remove RFID Board
  - 5.13.5: Install RFID Board
  - 5.13.6: Install Rear Cover
  - 5.13.7: Install Console
  - 5.13.8: Plug Cables into Console
  - 5.13.9: Complete installation
- 5.14: Tuner Replacement
  - 5.14.1: Disconnect Power Source
  - 5.14.2: Remove Console
  - 5.14.3: Remove Tuner
  - 5.14.4: Install Tuner
  - 5.14.5: Install Console
  - 5.14.6: Plug Cables into Console
  - 5.14.7: Complete installation
- 5.15: USB Cable Replacement
  - 5.15.1: Disconnect Power Source
  - 5.15.2: Remove Console
  - 5.15.3: Remove Rear Cover
  - 5.15.4: Remove USB Cable
  - 5.15.5: Install USB Cable
  - 5.15.6: Install Rear Cover
  - 5.15.7: Install Console
  - 5.15.8: Plug Cables into Console
  - 5.15.9: Complete installation
- 5.16: USB Port Replacement
  - 5.16.1: Disconnect Power Source
  - 5.16.2: Remove Option Panel Assembly
  - 5.16.3: Remove USB Port
  - 5.16.4: Install USB Port
  - 5.16.5: Install Option Panel Assembly
  - 5.16.6: Complete installation
- 5.17: WLAN / Bluetooth Antenna Replacement
  - 5.17.1: Disconnect Power Source
  - 5.17.2: Remove Console
  - 5.17.3: Remove Rear Cover
  - 5.17.4: Remove WLAN / Bluetooth Antenna
  - 5.17.5: Install WLAN / Bluetooth Antenna
  - 5.17.6: Install Rear Cover
  - 5.17.7: Install Console
  - 5.17.8: Plug Cables into Console
  - 5.17.9: Complete installation
Chapter 6: Troubleshooting
- 6.1: Knowledge Base
- 6.2: Troubleshooting - Heart Rate Reading
- 6.3: Troubleshooting - Main Console Screen
- 6.4: Troubleshooting - Center Console
- 6.5: Troubleshooting - Keypad LED's
- 6.6: Troubleshooting - Life Fitness On Demand+
- 6.7: Troubleshooting - Service items
- 6.8: Troubleshooting - Smart Lighting
- 6.9: Troubleshooting - Wireless Charger
- 6.10: Troubleshooting - Wireless Headphones
Chapter 7: Software
- 7.1: Update Console Software
- 7.2: How to perform a System Recovery for the Console
  - 7.2.1: USB Method of System Recovery
  - 7.2.2: SD Card Method of System Recovery
Chapter 8: Diagnostics
- 8.1: Access Systems Options
  - 8.1.1: Access Motor Modules Test
    - 8.1.1.1: Incline Motor Test
    - 8.1.1.2: Drive Motor Test
    - 8.1.1.3: How to Stop Tests
  - 8.1.2: Enable Wireless Connectivity
  - 8.1.3: Access Systems Errors
- 8.2: Default Settings
Chapter 9: Error Code List - Symbio console
- 9.1: Error 20
- 9.2: Error 21
- 9.3: Error 25
- 9.4: Error 27
- 9.5: Error 31
- 9.6: Error 33
- 9.7: Error 34
- 9.8: Error 38
- 9.9: Error 47
- 9.10: Error 49
- 9.11: Error 50
- 9.12: Error 62
- 9.13: Error 74
- 9.14: Error 76
- 9.15: Error 101
- 9.16: Error 110
- 9.17: Error 137
- 9.18: Error 138
- 9.19: Error 140
- 9.20: Error 143
- 9.21: Error 149
- 9.22: Error 150
- 9.23: Error 165
- 9.24: Error 166
- 9.25: Error 167
- 9.26: Error 168
- 9.27: Error 169
- 9.28: Error 171
- 9.29: Error 701
- 9.30: Error 702
- 9.31: Error 703
- 9.32: Error 704
- 9.33: Error 705
- 9.34: Error 706
- 9.35: Error 707
- 9.36: Error 708
- 9.37: Error 709
- 9.38: Error 710
- 9.39: Error 711
- 9.40: Error 712
- 9.41: Error 713
- 9.42: Error 714
- 9.43: Error 715
- 9.44: Error 716
- 9.45: Error 717
- 9.46: Error 718
- 9.47: Error 719
- 9.48: Error 720
Chapter 10: Schematics
- 10.1: Block Diagram - Console
Chapter 11: LED Chart
- 11.1: Diagnostic LED's
- 11.2: PTC Board LED's
- 11.3: PTC Board Connectors
Chapter 12: Glossary
- 12.1: AC Current
- 12.2: ANT+
- 12.3: Cable Tie
- 12.4: Connectors
- 12.5: Console
- 12.6: DVB-S2
- 12.7: DVB-T2
- 12.8: EEPROM
- 12.9: Encoder
- 12.10: ESD
- 12.11: Heart Rate Sensor / HR Sensor
- 12.12: Home Switch
- 12.13: IMDB
- 12.14: ISDB-T w/BCAS
- 12.15: Jumper
- 12.16: Km/h, or KPH
- 12.17: LCD
- 12.18: LED
- 12.19: Lifepulse™
- 12.20: Lift Motor
- 12.21: MIB
- 12.22: Motor Controller
- 12.23: MPH
- 12.24: NFC
- 12.25: PCB
- 12.26: PNC
- 12.27: PoE
- 12.28: Polar Receiver
- 12.29: Power Module
- 12.30: Pro:Idiom
- 12.31: PTC
- 12.32: PWM
- 12.33: QR Code
- 12.34: RCB
- 12.35: Reed Switch, Reed Sensor
- 12.36: RFID
- 12.37: RPM
- 12.38: SIB
- 12.39: Stop Switch
- 12.40: Telemetry
- 12.41: Telemetry Receiver
- 12.42: USB
- 12.43: Watt
Chapter 13: Warranty
- 13.1: Warranty Information

Was this helpful?