Using and Testing the Emergency Stop System
The treadmill is equipped with an Emergency Stop System. The system consists of a
rectangular stop magnet (located on the upper bridge plastic) attached to a safety
stop pull
cord.
Before starting a workout, attach the lanyard on the safety stop pull cord to an item of the user's clothing. During a workout, pull the cord to remove the magnet from the bridge. This will immediately stop the treadmill belt.
Note: Test the safety stop pull cord by attaching the lanyard to a user's item of clothing
during operation of the treadmill. While the treadmill is on and the console display
is
active, remove the safety stop pull cord / magnet from the bridge. A message will
be
displayed on the console similar to "Replace the emergency stop switch". With the
safety
stop pull cord removed no keys shall function on the treadmill. Place the safety stop
pull
cord back in place. The treadmill will reset and will be ready for operation.