Attach Line Cord to Base

  1. Turn treadmill base on its side.
  2. Loosen the screw located nearest the edge of the line cord bracket. Remove the other screw on the line cord bracket and retain hardware.
    Item Description Qty.
    1 Line Cord Bracket 1
    2 M4 X 10 Screw 2
    1.69 Nm (1.25 ft. lbs.)
    3 Power Cord 1
  3. Swing the line cord bracket off the receptacle. Plug in the line cord into its receptacle. Position the line cord bracket over the line cord.
  4. Fully tighten the screw previously loosened on the line cord bracket. Secure the line bracket with the previously removed screw.
Parent topic: Assembly