Preventive Maintenance Tips
Note: Safety of the equipment can be
maintained only if the equipment is examined regularly for damage or wear. Keep the
equipment out of use until defective parts are repaired or replaced. Pay special
attention to parts that are subject to wear, as outlined below.
Note: Pour assurer la sécurité du matériel, il convient de l’inspecter régulièrement afin
de déceler tout signe d’usure ou d’endommagement. N’utilisez pas l’appareil avant
d’avoir réparé ou remplacé les pièces défectueuses. Portez une attention toute particulière
aux pièces qui s’usent, comme indiqué ci-dessous.
The following preventive maintenance tips will keep the product operating at peak performance:
- Locate the product in a cool, dry place.
- Clean the display console and all exterior surfaces with an approved or compatible cleaner (see Approved and Compatible Cleaners) and a microfiber cloth.
- Long fingernails may damage or scratch the surface of the console; use the pad of the finger to press the selection buttons on the console.
- Check operation of the emergency stop system once a week.
- Inspect and vacuum the area directly surrounding and under the unit regularly.
- Vacuum around the striding belt regularly to keep debris from accumulating.
- Inspect exterior parts regularly for wear, particularly the striding belt, deck and line cord.
- Check to make sure the unit is properly leveled.
- Check the position (centering) of the striding belt.
Note: Normal belt operating position is for the belt to be located within the belt travel
indicators on the rear roller guards. Refer to Tracking (Centering) A Striding Belt or
contact Customer Support Services for proper alignment instructions.