Assembly

In this section:

  1. Hardware and Required Tools
  2. Attach Line Cord to Base
  3. Remove Motor Cover
  4. Attach Uprights
  5. Secure Bridge Assembly to Uprights
  6. Secure Console Mounting Bracket to Bridge Assembly
  7. Secure Hardware into Ergo Bar Assembly
  8. Connect Base Power/Communication Cable
  9. Attach Bridge Top Cover
  10. Attach Outer Handrail Covers
  11. Attach Inner Handrail Covers
  12. Attach Bridge Bottom Cover
  13. Attach Console Neck Spacer
  14. Attach Activity Zone
  15. Base to Console Cable Connections
  16. Attach Console and Console Rear Shroud Assembly
  17. Attach Lower Frame Extrusion Assemblies
  18. Attach Lower Extrusion Spacer
  19. Secure Upright Covers to Uprights
  20. Attach Rear End Caps
  21. Reattach Motor Cover
  22. Insert Cup Holders and Handrail Grommets
  23. Install Coaxial and Ethernet Cables