Install Handlebar Assembly

  1. The horizontal handlebar slider of the indoor cycle is spring loaded and will extend quickly unless the handlebar is mounted onto the slider. Extension of the horizontal handlebar slider without the handlebar mounted may cause injury and / or damage to the indoor cycle.
    Warning: Do not remove the safety pin before the handlebar has been mounted on the horizontal handlebar slider.
    Item Description Qty.
    1 Horizontal Handlebar Slider 1
    2 Safety Pin 1
  2. Do not remove the cardboard which covers the t-nut. The cardboard will slide out during installation and guides the t-nut for easy installation.
  3. Turn the thumb lever on the handlebar assembly to the left. Slide handlebar assembly onto the horizontal handlebar slider.
    Item Description Qty.
    1 Horizontal Handlebar Slider 1
    2 Handlebar Assembly 1
  4. Align handlebar assembly with position 0.
    Item Description Qty.
    1 Handlebar Assembly Position 0 1

    The cardboard will slide out when the handlebar assembly is positioned on the horizontal handlebar slider.

  5. Install the handlebar end cap and bolt using a 3 mm Allen wrench.
    Item Description Qty.
    1 Handlebar End Cap 1
    2 Bolt 1
  6. Plug in both console cables and position them in the slot. Fold the connected console cables so they fit into position. Install the seal, plastic cover, and screws using a 2 mm Allen wrench.
    Item Description Qty.
    1 Console Cable 2
    2 Seal 1
    3 Plastic Cover 1
    4 Screw 2
  7. Remove safety pin from frame using a 6 mm Allen wrench.
    Item Description Qty.
    1 Frame 1
    2 Safety Pin 1
  8. Lift the handlebar to position 6 and screw the pop pin knob completely into the frame to lock the handlebar stem.
    Item Description Qty.
    1 Position 6 1
    2 Frame 1
    3 Pop Pin Knob 1
Parent topic: Assembly Procedure