Install Front Stabilizer Assembly

  1. Install bolts, washers, and spacers securing front stabilizer assembly to frame using a 17 mm socket wrench.
    Item Description Qty.
    1 Nut 1
    2 Front Stabilizer Assembly 1
    3 Spacer 2
    4 Washer 2
    5 Bolt 2

    Tighten hardware to 37 ft-lb (50 Nm).

Warning: Ensure that bolts are tightened with the specified force to minimize loosening during use. If bolts are loosened after initial assembly, we recommend using medium-strength Loctite® #243 when reassembling.
Parent topic: Assembly Procedure