Atmos Treadmill and Atmos Home Edition Treadmill

Owner's Manual / Assembly Instructions

• Chapter 1: Additional Information
  • 1.1: Link to Additional Information Online
• Chapter 2: Getting Started
  • 2.1: Safety Instructions
  • 2.2: Consignes de Sécurité
  • 2.3: Set-Up
    • 2.3.1: Electrical Power Requirements
    • 2.3.2: Grounding Instructions
    • 2.3.3: How to Position and Stabilize the Unit
    • 2.3.4: Safety Clearances
    • 2.3.5: Turning the Unit On / Off
  • 2.4: Immobilization Method - SL Console
  • 2.5: Immobilization Method - SE4 Console
• Chapter 3: Product Overview
  • 3.1: Product Features
  • 3.2: Mounting and Dismounting the Unit
  • 3.3: User Position
  • 3.4: Using and Testing the Emergency Stop System
  • 3.5: Product Labels
  • 3.6: Label Locations
• Chapter 4: Assembly
  • 4.1: Hardware
  • 4.2: Required Tools
• Chapter 5: Assembly Procedure
  • 5.1: Unpacking and Disposal of Packaging
  • 5.2: Remove Motor Cover Top Shroud
  • 5.3: Attach Upright Weldments to Base
  • 5.4: Attach Bridge Weldment to Upright Weldments
  • 5.5: Tighten Screws Securing Upright Weldments to Base
  • 5.6: Cable Connections: Base to MDB PC Board
  • 5.7: Ferrite Installation - Motor Pan
  • 5.8: Install SE4 Cables to Comport Panel
  • 5.9: Attach Console Weldment to Bridge Weldment
  • 5.10: Install Ground Cable
  • 5.11: Attach Upper Bridge Shroud to Bridge Weldment
  • 5.12: Attach Lower Bridge Shroud to Bridge Weldment
  • 5.13: Attach Console Lower Shroud
  • 5.14: Ferrite Installation - Bottom of Console Weldment
  • 5.15: Cable Connections: Base to Console
  • 5.16: Attach Console: SE4
  • 5.17: Attach Console: SL
  • 5.18: Attach Console Back Shroud to Console Weldment
  • 5.19: Secure Motor Cover Front Shroud
  • 5.20: SE4 Power Supply Cable and Ferrite Installation
  • 5.21: Secure Motor Cover Top Shroud
  • 5.22: Attach Power Cord
  • 5.23: Test Unit For Proper Operation
• Chapter 6: Specifications
  • 6.1: Specifications
• Chapter 7: Service and Technical Data
  • 7.1: Preventive Maintenance Tips
  • 7.2: Approved and Compatible Cleaners
  • 7.3: Preventive Maintenance Schedule
  • 7.4: Troubleshooting the Treadmill
  • 7.5: How To's
    • 7.5.1: Knowledge Base
    • 7.5.2: How To Obtain Product Service
    • 7.5.3: How to Adjust and Tension the Striding Belt
    • 7.5.4: Belt Tensioning Bolts
    • 7.5.5: Tensioning an Existing Striding Belt
    • 7.5.6: Tracking (Centering) a Striding Belt
  • 7.6: Software Updates
• Chapter 8: Warranty
  • 8.1: Warranty Information
• Chapter 9: Release Notes
  • 9.1: Updates to Manual