Attach Upper Bridge Shroud to Bridge Weldment

  1. Separate upper bridge shroud from lower bridge shroud if attached.
  2. Route cable through console weldment.
  3. Attach screws to secure upper bridge shroud to bride weldment using a Phillips screwdriver.
Item Description Qty.
1 Cable 1
2 Upper Bridge Shroud 1
3 Bridge Weldment 1
4 SCREW: 8-18 X 1/2 PHIL, TRS, AB, ST, ZB 4
5a Commercial Tether Assembly (attached) 1
5b Home Edition Tether Assembly (loose) 1
12.4 in-lb / 1.4 Nm
Note: Light Commercial Units: The tether assembly with lanyard (5a) comes attached to the upper bridge weldment.
Note: Home Edition Units: The tether assembly (5b) does not have a lanyard and does not come attached to the upper bridge weldment.
Parent topic: Assembly Procedure