SE4 Power Supply Cable and Ferrite Installation

The following procedure shows how to install power supply cable and ferrite for the SE4 Console. If SL Console is being installed, skip this step and continue to Secure Motor Cover Top Shroud.
  1. Attach cable (line filter to power supply) to piggyback tabs on cable (power input).
    Important: Brown wire goes to black wire. Blue wire goes to white wire.
    Item Description Qty.
    1 Cable: Line Filter to Power Supply 1
    2 Cable: Power Input 1
  2. Connect cable to power supply in the orientation shown. Connect ground from cable (line filter to power supply) to motor pan using an 8 mm socket wrench.
    Item Description Qty.
    1 Cable: Line Filter to Power Supply 1
    2 Power Supply 1
    3 Ground Cable Connection Location 1
  3. Assemble ferrite to power supply cable as shown.

    Small Ferrite

    Item Description Qty.
    1 Ferrite-Bead: Suppression

    (Small Ferrite)

    		 1
    2 Power Supply 1
Parent topic: Assembly Procedure