Install Side Handles

  1. Remove three locknuts from left support leg using 17mm open-end wrench and 6mm Allen wrench. Keep the two spacers in place.
    Item Description Qty.
    1 Locknut, M10 x 1.50 3
    2 Spacer 2
    3 Side Handle, Left 1
  2. Install the left side handle and three locknuts using 17mm open-end wrench and 6mm Allen wrench. Ensure upper roll pin enters hole in frame.
  3. Install screws securing left lower rear cover to frame using a Phillips screwdriver.
    Item Description Qty.
    1 Cover, Rear, Lower, Left 1
    2 Screw, Pan Head Phillips, 10-24 x .75" 3
  4. Install grommets to left top rear cover.
    Item Description Qty.
    1 Grommet, Nylon, Short 3
    2 Cover, Rear, Top, Left 1
  5. Install screws into grommets securing left lower rear cover to left top rear cover using a Phillips screwdriver.
    Item Description Qty.
    1 Screw, Pan Head Phillips, M4.2 x 0.7 x 19 3
    2 Screw, Pan Head Phillips, 10-24 x .75" 2
    3 Cover, Rear, Top, Left 1
    4 Cover, Rear, Lower, Left 1
  6. Install screws securing left top rear cover to frame using a Phillips screwdriver.
  7. Open gasket and install around left side handle. Press gasket down onto left lower rear cover.
    Item Description Qty.
    1 Gasket 1
    2 Side Handle, Left 1
    3 Cover, Rear, Lower, Left 1
  8. Repeat Steps 1-7 for the right side.
Parent topic: Assembly Procedure - R Series Lower Body