Assembly Procedure - R Series Total Body

Two people will be required for this procedure.

Tip: Read and understand all instructions thoroughly before assembling this unit. Check all items carefully. If there is damage, see the Customer Service section of this manual for proper procedure to return, replace, or reorder parts.

The words "left" and "right" denote the user's orientation.

Verify you have received the correct package
  1. Read box label to verify the model number and voltage (optional) match what was ordered.
  2. Verify paint color matches what was ordered.

In this section:

  1. Verify Parts List Shown Below
  2. Tools Required
  3. Lift and Move Unit
  4. Install Console Weldment
  5. Note for Single Box Option
  6. Install Cables to Console
  7. Install Console to Console Weldment
  8. Install Console Cables to Base (Basic Cabling)
  9. Install Console Cables to Base (Advanced Cabling)
  10. Install Accessory Tray Base
  11. Install Accessory Tray Top
  12. Install Accessory Tray Bottom
  13. Install Rear Covers
  14. Remove Left and Right Handle Assembly
  15. Install Left Linkage Rod
  16. Install Right Linkage Rod
  17. Install Contact Heart Rate Cable
  18. Install Foot Pads
  19. Visually Inspect Unit
  20. Level Unit
    This procedure will level the unit by evenly adjusting the weight on the rear feet. Leveling the unit will eliminate rocking during use.
Parent topic: Assembly