R Series Arc Trainer

Assembly Instructions

• Chapter 1: Getting Started
  • 1.1: Safety Instructions
    • 1.1.1: Testing Parameters
  • 1.2: Consignes de Sécurité
    • 1.2.1: Paramètres de test
  • 1.3: Setup
  • 1.4: Choosing and Preparing Site
  • 1.5: Electrical Power Requirements (Applicable for Units Using External Power Supply)
  • 1.6: Install External Power Supply
  • 1.7: Check for Console Power
  • 1.8: Cable TV Hook Up
• Chapter 2: Product Overview
  • 2.1: Product Features
  • 2.2: Mounting and Dismounting the Arc Trainer
  • 2.3: How to Use the Arc Trainer
• Chapter 3: Assembly
  • 3.1: Packing and Shipping Options
  • 3.2: Assembly Procedure - R Series Lower Body
    • 3.2.1: Verify Parts List Shown Below
    • 3.2.2: Tools Required
    • 3.2.3: Lift and Move Unit
    • 3.2.4: Install Console Weldment
    • 3.2.5: Note for Single Box Option
    • 3.2.6: Install Cables to Console
    • 3.2.7: Install Console to Console Weldment
    • 3.2.8: Install Console Cables to Base (Basic Cabling)
    • 3.2.9: Install Console Cables to Base (Advanced Cabling)
    • 3.2.10: Install Accessory Tray Base
    • 3.2.11: Install Accessory Tray Top
    • 3.2.12: Install Accessory Tray Bottom
    • 3.2.13: Install Side Handles
    • 3.2.14: Install Foot Pads
    • 3.2.15: Visually Inspect Unit
    • 3.2.16: Level Unit
  • 3.3: Assembly Procedure - R Series Total Body
    • 3.3.1: Verify Parts List Shown Below
    • 3.3.2: Tools Required
    • 3.3.3: Lift and Move Unit
    • 3.3.4: Install Console Weldment
    • 3.3.5: Note for Single Box Option
    • 3.3.6: Install Cables to Console
    • 3.3.7: Install Console to Console Weldment
    • 3.3.8: Install Console Cables to Base (Basic Cabling)
    • 3.3.9: Install Console Cables to Base (Advanced Cabling)
    • 3.3.10: Install Accessory Tray Base
    • 3.3.11: Install Accessory Tray Top
    • 3.3.12: Install Accessory Tray Bottom
    • 3.3.13: Install Rear Covers
    • 3.3.14: Remove Left and Right Handle Assembly
    • 3.3.15: Install Left Linkage Rod
    • 3.3.16: Install Right Linkage Rod
    • 3.3.17: Install Contact Heart Rate Cable
    • 3.3.18: Install Foot Pads
    • 3.3.19: Visually Inspect Unit
    • 3.3.20: Level Unit
• Chapter 4: Service and Technical Data
  • 4.1: Preventive Maintenance Tips
  • 4.2: Approved and Compatible Cleaners
  • 4.3: Maintenance Schedule
  • 4.4: Troubleshooting the Polar® Heart Rate Chest Strap
  • 4.5: Troubleshooting the Lifepulse™ System Sensors
  • 4.6: Drive Belts
    • 4.6.1: Remove Front Access Cover
    • 4.6.2: Inspect Drive Belts
    • 4.6.3: Install Access Cover
  • 4.7: How to Obtain Product Service
• Chapter 5: Specifications
  • 5.1: R Series - Specifications