Strength Systems

Heavy Duty Elite Racks

Owner's Manual

• Chapter 1: Safety
  • 1.1: Safety Information
  • 1.2: Product Labels
  • 1.3: Label Locations
  • 1.4: Optional Equipment Product Labels
  • 1.5: Optional Equipment Label Locations
• Chapter 2: Assembly
  • 2.1: Components
  • 2.2: Storage Assembly (spider): HR/MR/PR
  • 2.3: Storage Assembly (spider): Combo SS
  • 2.4: Storage Assembly (spider): Combo MS/LS
  • 2.5: Storage Assembly (spider): Combo LD
  • 2.6: Storage Assembly (upright): HR/MR/PR
  • 2.7: Storage Assembly (upright): HR/MR/PR KB/BP
  • 2.8: Storage Assembly (upright): KB/BP Front Load
  • 2.9: Storage Assembly (upright): KB/BP Side Load
  • 2.10: Storage Assembly (upright): Combo 90 Degree
  • 2.11: Base Assembly: HR
  • 2.12: Base Assembly: MR/PR
  • 2.13: Base Assembly Combo: MS
  • 2.14: Base Assembly: Combo Cable
  • 2.15: Bench Assembly
  • 2.16: Upright Assembly: HR
  • 2.17: Upright Assembly: MR
  • 2.18: Upright Assembly: PR
  • 2.19: Upright Assembly: Combo PR/MR
  • 2.20: Pull-Up Assembly: HR/MR/Combo
  • 2.21: Pull-Up Assembly: K-Shaped PR
  • 2.22: Pull-Up Assembly: Cable
  • 2.23: Cross Member Assembly: PR
  • 2.24: Cross Member Assembly: MR
  • 2.25: Cross Member Assembly: Combo
  • 2.26: Rack Connector Assembly: HDLRC-TS
  • 2.27: Rack Connector Assembly: HDLRC-SQ
  • 2.28: Anvil Plate Assembly: HR
  • 2.29: Anvil Plate Assembly: MR
  • 2.30: Anvil Plate Assembly: PR
  • 2.31: Bar Hanger Assembly: HR/MR/PR
  • 2.32: Bar Hanger Assembly: Combo
  • 2.33: Hang Accessories
  • 2.34: Cable Assembly: Base Braces
  • 2.35: Cable Assembly: Base DAP
  • 2.36: Cable Assembly: Top Plates
  • 2.37: Cable Assembly: Top Plates DAP
  • 2.38: Cable Assembly: Pull-Up DAP
  • 2.39: Cable Assembly: Weight Stack
  • 2.40: Cable Routing
  • 2.41: Storage Rack Assembly: HDLASR
  • 2.42: Optional Power Pivot: HR/MR/PR
  • 2.43: Optional Battle Rope: HR/MR/PR
  • 2.44: Optional Sliding Band Peg: HRL
  • 2.45: Optional Bar Storage HR/MR/PR
  • 2.46: Optional Bar Catch Storage: HR/MR/PR
  • 2.47: Optional SLS: HR/MR/PR
  • 2.48: Optional Upper Band Pegs: HR/MR/PR
  • 2.49: Optional Dip: HR/MR/PR
  • 2.50: Optional Ball Storage: HR/MR/PR
  • 2.51: Optional Technique Trays: HR/MR/PR
  • 2.52: Optional Step Up: HR/MR/PR
  • 2.53: Optional Spotter Platform: HR/MR/PR
  • 2.54: Optional Branding Plate: HR/MR/PR
  • 2.55: Optional Nordic Hamstring: Attach Hanger
  • 2.56: Optional Nordic Hamstring: Plates HRL
  • 2.57: Optional Nordic Hamstring: Plates HRS
  • 2.58: Optional Nordic Hamstring: Plates MR
  • 2.59: Optional Nordic Hamstring: Plates PR
  • 2.60: Optional Rope Pull: HR/MR/PR
  • 2.61: Optional Sliding Band Peg: HR/MR/PR
  • 2.62: Optional Dock-N-Lock: HR/MR/PR
  • 2.63: Optional Safety Squat Handles: HR/MR/PR
  • 2.64: Optional Wing: PR
  • 2.65: Optional Perpendicular Band Pegs: PR
  • 2.66: Optional Perpendicular Band Pegs Install: PR
  • 2.67: Optional Strap Bar Catch: PR
  • 2.68: Optional Side Mount Pull-Up: PR
• Chapter 3: Cable Handling Guide
  • 3.1: Cable Terminations, Tensioning and Wear Guide
  • 3.2: Cable Terminations
  • 3.3: Tensioning Cable
  • 3.4: Strength Cable Wear Guide
  • 3.5: Insert Inspection
• Chapter 4: Product Information
  • 4.1: Rack Options and Accessories
• Chapter 5: Exercise
  • 5.1: General Exercise Information
• Chapter 6: Maintenance Procedures
  • 6.1: Maintenance Schedule
• Chapter 7: Warranty
  • 7.1: What is Covered
  • 7.2: Who is Covered
  • 7.3: Who Pays Transportation and Insurance For Service
  • 7.4: What We Will Do To Correct Covered Defects
  • 7.5: What is Not Covered
  • 7.6: Owner's Manual
  • 7.7: Exclusive Warranty
  • 7.8: Changes in Warranty Not Authorized
  • 7.9: Effects of State Laws
• Chapter 8: Bolt to Floor Guide
  • 8.1: Introduction
  • 8.2: Delivery and Installation Tips
  • 8.3: Anchor Type - Static
  • 8.4: Anchor Specifications
  • 8.5: Pullout Force
  • 8.6: Tools Required
  • 8.7: Anchor Procedure
  • 8.8: Foot Dimensions