Install Batteries

  1. Remove the battery access cover by loosening the screw using a flat head screwdriver. The screw will remain in the battery access cover.
    Item Description Qty.
    1 Console 1
    2 Screw 1
    3 Battery access cover 1
  2. Note: The batteries must be installed in the proper direction.
    Install two batteries as shown.
    Item Description Qty.
    1 Console 1
    2 Batteries 2
  3. Insert the two battery access cover tabs into console.
    Item Description Qty.
    1 Console 1
    2 Battery access cover 1
    3 Tabs 2
  4. Tighten the battery access cover screw using a flat head screwdriver.
  5. Plug the console cable from shroud into the console.
    Item Description Qty.
    1 Console cable 1
    2 Console 1
    3 Battery access cover 1
    4 Mounting tabs 1
  6. Insert the console cable into the mounting tabs on the battery access cover.
Parent topic: Assembly Procedure