Release Handle Replacement

  1. Loosen and remove the M8 x 1.25 screw, then remove the release handle assembly from the carriage.
    Item Description Qty.
    1 M8 x 1.25 Screw 1
    2 Release Handle 1
    3 Carriage 1
  2. Check and replace the pivot lever at this time if needed.
    Item Description Qty.
    1 Pivot Lever 1
    2 M10 Nylock Nut 1
    Note: Item 2 can be removed to gain more space.
  3. Replace the release handle and its hardware and tighten to 20-29 ft-lbs/ 27.1-39.3 Nm.
    Item Description Qty.
    1 M8 x 1.25 Screw 1
    2 Release Handle 1
    3 Carriage 1
Parent topic: Assembly