Hardware Tightening Sequence for the Stabilizers

Secure both stabilizers to frame using a T40 Torx socket wrench. Tighten hardware in the following order:
  1. Tighten the bottom screws on both stabilizers.
    Tighten hardware to 14.8 ft-lb / 20 Nm.

    Rear Stabilizer - Bottom Screws

    Front Stabilizer - Bottom Screws

  2. Tighten the top screws on both stabilizers.
    Tighten hardware to 14.8 ft-lb / 20 Nm.

    Rear Stabilizer - Top Screws

    Front Stabilizer - Top Screws

Parent topic: Assembly Procedure