Attach Console: SL or SE4
Install screws securing console to console weldment using a Phillips screwdriver.
Note: Use the hook on top of the console weldment to aid in console
installation.
SL Console
| Item | Description | Qty. |
|---|---|---|
| 1 | SL Console | 1 |
| 2 | Console Weldment | 1 |
| 3 | SCREW: M5 X 0.8 X 14, PHL, PAN, MS, ST, ZN | 5 |
 |
16.8 in-lb / 1.9 Nm |
Note: Do not install the screw in the location shown (next to arrow)
if the SE4 console has a Set Top Box Sync (STB) receiver! The screw will hit the STB
receiver inside of the console.
| Item | Description | Qty. |
|---|---|---|
| 1 | SE4 Console | 1 |
| 2 | Console Weldment | 1 |
| 3 | SCREW: M5 X 0.8 X 14, PHL, PAN, MS, ST, ZN | 4 |
|
16.8 in-lb / 1.9 Nm |