HS-ABC to HS-AB Retrofit Kit
This instruction sheet describes how to install
the HS-ABC to HS-AB Retrofit Kit to the Hammer Strength Hammer Select Abdominal
Crunch.
Tools Required:
- 7 mm Allen wrench
- 17 mm wrench
- Torque wrench
- Rubber mallet
Estimated Time Required: 1 hour
| Description | Qty. | Description | Qty. | |
|---|---|---|---|---|
| Cap, 2" x 3" 11-14GA, End | 4 | Screw, M10 x 1.5 50mm | 2 | |
| Bumper, 2-1/8 x 4-5/8 | 1 | Screw, M10 x 1.5 75mm | 12 | |
| Cap, End 1.00 DIA RD 10-12 GA | 2 | Screw, M10 x 1.5 110mm | 2 | |
| 3 x 6 Flange Rubber Slipper | 2 | Nut, M10 Hex Nylock SS | 18 | |
| Grip, 1.00 ID x .125 x 7 | 2 | Washer, Spacer | 2 | |
| Sleeve, Accordion 1.0 ID x 1 | 4 | Cap, Grip 1.25 OD | 2 | |
| Assembly, Pillow Block 4.88 x 2.75 | 4 | Ring, Grip 1.25 OD | 2 | |
| Assembly: HS-AB Linkage | 1 | Spacer, 0.630 ID x 0.20 | 2 | |
| Shaft, .625 x .406 x 1.200 | 2 | Label, Warning, Triangle | 1 | |
| Washer, 3/8 SAE SS | 20 | Weldment, Rear Frame | 1 | |
| Washer, 3/8 ID x 1.25 OD SS | 8 | Weldment, Workarm | 1 | |
| Screw, M10 x 1.5 35mm | 6 | Weldment, Cam | 1 | |
| Screw, M10 x 1.5 45mm | 2 |