Install Components to Rear Frame

  1. Press rubber slippers and triangle warning label onto rear frame.
  2. Install end caps to rear frame using a rubber mallet.
  3. Install screws, washers, and locknuts securing bumper to rear frame using 7mm Allen wrench and 17mm wrench.
    Item Description Qty.
    1 Weldment, Rear Frame 1
    2 3 x 6 Flange Rubber Slipper 2
    3 Cap, 2" x 3" 11-14GA, End 3
    4 Label, Warning, Triangle 2
    5 Bumper, 2-1/8 x 4-5/8 1
    6 Washer, 3/8 ID x 1.25 OD SS 4
    7 Nut, M10 Hex Nylock SS 2
    8 Screw, M10 x 1.5 110mm 2

    Tighten hardware to 8-10 ft-lb / 10.8-13.5 Nm.

Parent topic: HS-ABC to HS-AB Retrofit Kit