CORE Assembly (HDU-CCOR, HDU-PCOR)

  1. Connect the upper tower/upright assembly and upright/cross member assemblies with the 6 inch connecting weldment and hand tighten hardware.
    Item Description Qty.
    1 Rectangle Tubing Nut, 11GA, 3" 4
    2 Tower/Upright Assembly 1
    3 6 Inch Cross Member Weldment 1
    4 Screw, 1/2-13 X 1.25 4
    5 1/2 in Star Washer 4
    6 Upright/Cross Member Assemblies 1
  2. Connect the lower tower assembly and upright assembly with the 6 inch connecting weldment and hand tighten hardware.
    Item Description Qty.
    1 Tower Assembly 1
    2 Rectangle Tubing Nut, 11GA, 3" 4
    3 6 Inch Cross Member Weldment 1
    4 Screw, 1/2-13 X 1.25 4
    5 1/2 in Star Washer 4
    6 Upright Assembly 1
  3. Attach the pull up weldment to the tower and hand tighten hardware.
    Item Description Qty.
    1 Screw, 1/2-13 X 4.5 2
    2 Backing Washer 2
    3 Tower Assembly 1
    4 1/2 in Star Washer 2
    5 1/2 in Lock Nut 2
    6 Pull Up Bar 1
    Note: Repeat procedure on other side.
  4. Add optional trays to uprights and hand tighten hardware.
    Item Description Qty.
    1 Screw, 1/2-13 X 4.5 2
    2 Backing Washer 2
    3 Tower Assembly 1
    4 Washer, Step, 1/2 in, 0.57 in 2
    5 1/2 in Lock Nut 2
    6 Optional Tray Assembly 1
  5. Tighten hardware with backing washers to 20-25 ft-lb (27.1-33.9 nm) Tighten all other hardware to 45-50 ft-lb (61-67.8 nm).
Parent topic: Assembly Procedure