Life Fitness Arc Trainer

Assembly Instructions

• Chapter 1: Getting Started
  • 1.1: Safety Instructions
    • 1.1.1: Testing Parameters
  • 1.2: Consignes de Sécurité
    • 1.2.1: Paramètres de test
  • 1.3: Setup
  • 1.4: Choosing and Preparing Site
  • 1.5: Electrical Power Requirements (Applicable for Units Using External Power Supply)
  • 1.6: Install External Power Supply
  • 1.7: Check for Console Power - Integrity SL
  • 1.8: Cable TV Hook Up
• Chapter 2: Product Overview
  • 2.1: Product Features
  • 2.2: Mounting and Dismounting the Arc Trainer
  • 2.3: How to Use the Arc Trainer
• Chapter 3: Assembly
  • 3.1: Assembly Procedure - Lower Body
    • 3.1.1: Verify Parts List Shown Below
    • 3.1.2: Tools Required
    • 3.1.3: Lift and Move Unit
    • 3.1.4: Install Console Weldment
    • 3.1.5: Base to Console Cable Connections
    • 3.1.6: Attach Console and Console Back Cover - Integrity SL
    • 3.1.7: Attach Console and Console Back Cover - Discover SE4 (16" or 24")
    • 3.1.8: Install Console Cables to Base (Basic Cabling) - SL Only
    • 3.1.9: Install Console Cables to Base (Advanced Cabling) - SE4 Only
    • 3.1.10: Install Accessory Tray Base
    • 3.1.11: Install Accessory Tray Top
    • 3.1.12: Install Accessory Tray Bottom
    • 3.1.13: Install Cup Holder
    • 3.1.14: Install Side Handles
    • 3.1.15: Install Foot Pads
    • 3.1.16: Visually Inspect Unit
    • 3.1.17: Level Unit
    • 3.1.18: Discard Unused Hardware
  • 3.2: Assembly Procedure - Total Body
    • 3.2.1: Verify Parts List Shown Below
    • 3.2.2: Tools Required
    • 3.2.3: Lift and Move Unit
    • 3.2.4: Remove Console Weldment from Frame
    • 3.2.5: Remove, Rotate and Reinstall the Left and Right Handle Assemblies
    • 3.2.6: Install Left Linkage Rod
    • 3.2.7: Install Right Linkage Rod
    • 3.2.8: Install Contact Heart Rate Cable
    • 3.2.9: Install Console Weldment
    • 3.2.10: Base to Console Cable Connections
    • 3.2.11: Attach Console and Console Back Cover - Integrity SL
    • 3.2.12: Attach Console and Console Back Cover - Discover SE4 (16" or 24")
    • 3.2.13: Install Console Cables to Base (Basic Cabling) - SL Only
    • 3.2.14: Install Console Cables to Base (Advanced Cabling) - SE4 Only
    • 3.2.15: Install Accessory Tray Base
    • 3.2.16: Install Accessory Tray Top
    • 3.2.17: Install Accessory Tray Bottom
    • 3.2.18: Install Cup Holder
    • 3.2.19: Install Side Handles
    • 3.2.20: Install Foot Pads
    • 3.2.21: Visually Inspect Unit
    • 3.2.22: Level Unit
• Chapter 4: Specifications
  • 4.1: Specifications
• Chapter 5: Service and Technical Data
  • 5.1: Preventive Maintenance Tips
  • 5.2: Approved and Compatible Cleaners
  • 5.3: Maintenance Schedule
  • 5.4: Troubleshooting the Polar® Heart Rate Chest Strap
  • 5.5: Troubleshooting the Lifepulse™ System Sensors
  • 5.6: Drive Belts
    • 5.6.1: Remove Front Access Cover
    • 5.6.2: Inspect Drive Belts
    • 5.6.3: Install Access Cover
  • 5.7: How To's
    • 5.7.1: Knowledge Base
    • 5.7.2: How to Obtain Product Service
• Chapter 6: Warranty
  • 6.1: Warranty Information