Install Custom Sign
The super duty crossmember is required to install the custom sign.
- Install screws, washers, spacers, and lock nuts securing optional custom sign and
backer plate to super duty crossmember using a 7mm Allen wrench and 17mm wrench.Note: Single custom sign can be installed on the front or rear of super duty crossmember.
Item Description Qty. 1 Super Duty Crossmember 1 2 Custom Sign 1 or 2 3 Backer Plate 1 or 2 4 Screw, M10 x 1.5, 25mm 2 5 Screw, M10 x 1.5, 30mm 2 6 Screw, M10 x 1.5, 35mm 4 7 Flat Washer, 3/8" 8 8 Lock Nut, M10 4 9 Spacer 2
Tighten hardware to 40-50 in-lb (4.5-5.6 Nm).