Component and Hardware List

Item	Description	Qty.
1	Tower Frame	1
2	Guide Rod	2
3	Increment Weight Guide Rod	2
4	Rear Shroud	1
5	Label, Weight Stack	1
6	Tube Cap	2
7	Top Cap	1

Item	Description	Qty.
1	Tower Hardware Kit, CI-LR	1
2	Hole Plug, 8.7 mm	2
3	Hole Plug, ½"	2
4	Grommet	2
5	Shroud Retainer	14
6	Bushing	4
7	Screw, 8 x ¾" Phillips	2
8	Screw, M10 x 1.5, 55mm	2
9	Nut, M10 x 1.5, Hex Nylock	2
10	Nut, ¼" Nylock	2
11	Washer, Flat ¼" ID	2
12	Washer, Flat 3/8" ID	4
13	Weight Stack Cushion	2
14	Increment Weight Bumper	1
15	Spring	2
16	Guide Rod Housing	2
17	Pulley, 3.5" OD	1
18	Pulley, 4.5" OD	1

Item	Description	Qty.
1	Front Shroud, Left	1
2	Front Shroud, Right	1
3	Bottom Cap	1

Item	Description	Qty.
1	Front Shroud Hardware Kit	1
2	Screw, M4.2 x 0.7, Phillips	6
3	Screw, M10 x 1.5, 20mm	2
4	Washer, Flat 3/8"	2
5	Grommet, Shroud Retainer	6

Item	Description	Qty.
1	Support Leg, Front	1
2	Support Leg, Rear	1
3	Seat Frame Assembly	1
4	Upper Pulley Assembly	1
5	Pulley Bracket Assembly	1
6	Roller Pad Bracket	1
7	Roller Pad	2
8	Foot Support	1
9	Floating Pulley Assembly	1
10	Front Cap	1
11	Cable, 62" (1575mm)	1
12	Cable, 112" (2855mm)	1
13	Head Plate Assembly	1
14	Increment Weight Assembly	1
15	Multilingual Label Sheet	1
16	Weight Stack (Weight Plates)	1 (12)

Item	Description	Qty.
1	Hardware Kit, CI-LR	1
2	Nut, M10 x 1.5, Hex Nylock	4
3	Nut, M10 Hex Jam	1
4	Nut, M16 Hex Jam	1
5	Washer, Flat 3/8"	28
6	Plate, Roller Pad	2
7	Screw, M6, HCS, 50mm	4
8	Screw, M5 x 0.8 HXS, 8mm	2
9	Screw, M10 x 1.5, 25mm	20
10	Screw, M10 x 1.5, 30mm	2
11	Screw, M10 x 1.5, 75mm	2
12	Screw, M10 x 1.5, 80mm	2
13	Bushing, .969	2
14	Spacer Shaft	2
15	Increment Weight Cap, LBS	1
16	Increment Weight Cap, KG	1
17	Hole Plug, 1"	4
18	Cable End Insert	2
19	Cable End Housing	2
20	Cable End Link	2
21	Rod End Bearing	2
22	Snap Link	2
23	Bearing Housing Cap	2
24	Shaft Collar	2
25	Shim	2