Install Work Arm Assembly

  1. Install screws and washers securing the pivot support assembly to the tower frame using an 8mm Allen wrench.
    Item Description Qty.
    1 Pivot Support Assembly 1
    2 Tower Frame 1
    3 Screw, M10 x 1.5, 25mm 4
    4 Washer, Flat 3/8" 4

    Loosely hand tighten hardware.

  2. Slide the input weldment into the pivot support assembly.
    Item Description Qty.
    1 Input Weldment 1
    2 Pivot Support Assembly 1
  3. Slide .403" spacer, work arm assembly, and .653" spacer onto the input weldment.
    Important: Make sure selector pin from work arm assembly is inserted into bottom selection hole on input weldment.
    Item Description Qty.
    1 Work Arm Assembly 1
    2 Input Weldment 1
    3 Spacer, .403" 1
    4 Spacer, .653" 1
  4. Install screws and washers securing the pad mount assembly to the main frame assembly using an 8mm Allen wrench and 17mm wrench.
    Item Description Qty.
    1 Pad Mount Assembly 1
    2 Main Frame Assembly 1
    3 Screw, M10 x 1.5, 25mm 2
    4 Washer, Flat 3/8" 4
    5 Nut, M10 x 1.5, Hex Nylock 2

    Loosely hand tighten hardware.

  5. Install screw and washer securing the pad mount assembly to the input weldment using a 17mm wrench.
    Item Description Qty.
    1 Pad Mount Assembly 1
    2 Input Weldment 1
    3 Screw, M10 x 1.5, 30mm Hex Head 1
    4 Washer, Fender 3/8" 1

    Loosely hand tighten hardware.

Parent topic: Assembly Procedure