Component and Hardware List

Item	Description	Qty.
1	Tower Frame	1
2	Guide Rod	2
3	Increment Weight Guide Rod	2
4	Rear Shroud	1
5	Label, Weight Stack	1
6	Tube Cap	2
7	Top Cap	1

Item	Description	Qty.
1	Tower Hardware Kit, OP-SLCE	1
2	Hole Plug, 8.7 mm	2
3	Hole Plug, ½"	2
4	Grommet	2
5	Shroud Retainer	14
6	Bushing	4
7	Screw, 8 x ¾" Phillips	2
8	Screw, M10 x 1.5, 55mm	2
9	Nut, M10 x 1.5, Hex Nylock	2
10	Nut, ¼" Nylock	2
11	Washer, Flat ¼" ID	2
12	Washer, Flat 3/8" ID	4
13	Weight Stack Cushion	2
14	Increment Weight Bumper	1
15	Spring	2
16	Guide Rod Housing	2
17	Pulley, 3.5" OD	1
18	Pulley, 4.5" OD	1

Item	Description	Qty.
1	Front Shroud, Left	1
2	Front Shroud, Right	1
3	Bottom Cap	1

Item	Description	Qty.
1	Front Shroud Hardware Kit	1
2	Screw, M4.2 x 0.7, Phillips	6
3	Screw, M10 x 1.5, 20mm	2
4	Washer, Flat 3/8"	2
5	Grommet, Shroud Retainer	6

Item	Description	Qty.
1	Main Frame Assembly	1
2	Pivot Boom Assembly	1
3	Bottom Cross Brace	1
4	Rear Cross Brace	1
5	Left Handle Assembly	1
6	Right Handle Assembly	1
7	Cam	1
8	Cam Detent Plate	1
9	Cam Weldment	1
10	Work Arm Assembly	1
11	Pulley Arm Assembly	1
12	Pivot Shaft	1
13	Counter Weight	1
14	Thigh Pad Assembly	1
15	Kicker Assembly	1
16	Detent Pin Assembly	1
17	Detent Shaft	1
18	Spring Pin	1
19	Pulley Support Assembly	1
20	Seat Pad	1
21	Seat Back Assembly	1
22	Back Pad	1
23	Roller Pad Assembly	2
24	Front Cap	1
25	Multilingual Label Sheet	1
26	Cable	1
27	Increment Weight Assembly	1
28	Head Plate Assembly	1
29	Weight Stack (Weight Plates)	1 (12)

Item	Description	Qty.
1	Hardware Kit, OP-SLCE	1
2	Nut, M10 x 1.5, Hex Nylock	19
3	Nut, M16, Hex Jam	1
4	Nut, M10 x 1.5, Socket Head	5
5	Screw, M4 x 10mm, Phillips	2
6	Screw, M6, HCS, 50mm	4
7	Screw, M10 x 1.5, 35mm Flat Head	5
8	Bolt, M10 x 1.5, 50mm Square Neck	1
9	Screw, M10 x 1.5, 25mm	14
10	Screw, M10 x 1.5, 30mm	16
11	Screw, M10 x 1.5, 30mm Low Head	4
12	Screw, M10 x 1.5, 35mm	3
13	Screw, M10 x 1.5, 70mm	2
14	Screw, M10 x 1.5, 110mm	2
15	Screw, M10 x 1.5, 120mm	4
16	Cable Clip	1
17	Washer, M6	2
18	Washer, Flat 3/8"	57
19	Washer, Flat 30mm	3
20	Washer, 3/8" ID x 1.25" OD	1
21	Roller Pad Plate	1
22	Retainer Plate	1
23	Shaft Collar	2
24	Cable Retainer Service Plate	1
25	Increment Weight Cap, LBS	1
26	Increment Weight Cap, KG	1
27	Hole Plug, 1"	8
28	Spacer, .403"	2
29	Spacer, .653"	2
30	Bearing Housing Cap with Hole	3
31	Bearing Housing Cap	2
32	Pulley, 3.5" OD	1