Home page logo
Home page logo
LifeFitness.com
  • Support Hub
  • Parts
  • Table of Contents
  • العربية — Arabic Deutsche Español English français italiano 日本語 — Japanese Korean Nederlands português русский — Russian Turkey 中文 — Chinese
  • Log In

Multi-Jungle

Life FitnessMulti-JungleAssembly Manual
  • Chapter 1: Safety
    • 1.1: Safety Information
    • 1.2: Access Control
    • 1.3: Installation
    • 1.4: Proper Usage
    • 1.5: Inspection
    • 1.6: Operating Warnings
    • 1.7: Selectorized Weight Stack Systems
    • 1.8: Warnings and Cautions
    • 1.9: Product Labels
    • 1.10: Label Locations
      • 1.10.1: Attached Cable Crossover (PP-ACO)
      • 1.10.2: Free Standing Cable Crossover (PP-ACOFS)
      • 1.10.3: Dip/Chin Assist (PP-ADC)
      • 1.10.4: Adjustable Cable Column (PP-AP)
      • 1.10.5: Adjustable Pulley 4:1 (PP-AP41)
      • 1.10.6: Embedded Cable Crossover (PP-AXO)
      • 1.10.7: Crossover Boom (PP-BM)
      • 1.10.8: Boxing (PP-BX)
      • 1.10.9: Core (PP-CORE)
      • 1.10.10: Dip (PP-DIP)
      • 1.10.11: Dual Pulley High (PP-DPH)
      • 1.10.12: Dual Pulley Low (PP-DPL)
      • 1.10.13: Attached High Low Crossover (PP-FCO)
      • 1.10.14: Embedded High Low Crossover (PP-FXO)
      • 1.10.15: Handle Accessory Rack (PP-HAR)
      • 1.10.16: High Low (PP-HL)
      • 1.10.17: Lat Pull (PP-LP)
      • 1.10.18: Dual Handle Lat Pull (PP-LPD)
      • 1.10.19: Power Pivot (PP-PP)
      • 1.10.20: Rope Pull - Power Pivot (PP-RP)
      • 1.10.21: Rope Pull (PP-RPL)
      • 1.10.22: Low Row (PP-RW)
      • 1.10.23: Dual Handle Low Row (PP-RWD)
      • 1.10.24: Stall Bars (PP-SB)
      • 1.10.25: Storage Station (PP-SC)
      • 1.10.26: Step (PP-STP)
      • 1.10.27: Storage Connector (PP-SX)
      • 1.10.28: Triceps Pushdown (PP-TP)
  • Chapter 2: Assembly
    • 2.1: Install Weight Stacks
    • 2.2: Install Top Mount
    • 2.3: Install Top Mount
    • 2.4: Install Lower Mount
    • 2.5: Install Lower Mount
    • 2.6: Install Lower Mount
    • 2.7: Install Lower Mount
    • 2.8: Install Handle Accessory Rack
    • 2.9: Install Blank Shroud
    • 2.10: Install Front Shroud
    • 2.11: Cable Routing
      • 2.11.1: Adjustable Cable Column (MJAP), Adjustable Pulley 4:1 (MJAP41), Attached Cable Crossover (MJACO), Embedded Cable Crossover (MJAXO)
      • 2.11.2: Dip/Chin Assist (MJADC)
      • 2.11.3: Dual Lat Pull (MJLPD)
      • 2.11.4: Dual Pulley High (MJDPH)
      • 2.11.5: Dual Pulley Low (MJDPL)
      • 2.11.6: Dual Row (MJRWD)
      • 2.11.7: High Low (PP-HL), Attached High Low Crossover (PP-FCO), Embedded High Low Crossover (PP-FXO)
      • 2.11.8: Lat Pull (MJLP)
      • 2.11.9: Row (MJRW)
      • 2.11.10: Triceps Pushdown (MJTP)
  • Chapter 3: Cable Handling Guide
    • 3.1: Cable Connections, Seating, and Installation
    • 3.2: Cabling Procedure
      • 3.2.1: Direct Terminal
      • 3.2.2: Remote Terminal
    • 3.3: Tensioning Cable
    • 3.4: Strength Cable Wear Guide
    • 3.5: Insert Inspection
  • Chapter 4: Bolt to Floor Guide
    • 4.1: Introduction
    • 4.2: Delivery and Installation Tips
    • 4.3: Anchor Type - Static
    • 4.4: Pullout Force
    • 4.5: Tools Required
    • 4.6: Anchor Procedure
    • 4.7: Foot Dimensions

Cable Handling Guide

In this section:

  1. Cable Connections, Seating, and Installation
  2. Cabling Procedure
  3. Tensioning Cable
    Cable should have enough tension so it stays seated into the pulley but not so tight that it raises the head plate off the weight plate below it.
  4. Strength Cable Wear Guide
  5. Insert Inspection
    Inspect insert within the strain-relief cable end assembly and replace if any sign of damage.

Was this helpful?

Thanks!

Service Hub

  • Self Service
  • Order Parts
  • Warranties

Additional Support

  • Become a Service Partner
  • Request Service
  • Product Registration
  • Contact Us
  • Privacy Policy
  • Terms and Conditions

Copyright © 2026 Life Fitness

Building One-Page View

This might take a few seconds.