Cable Connections, Seating, and Installation
Cable connections with threaded cable ends are required to be installed and maintained following the specifications identified below. Failure to follow these specifications can lead to the dislocation of the threaded cable during use and can cause serious injury. Along with securing the threaded cable end and jam nut, it is important to check the entire unit and ensure that all hardware is securely fastened and not left loose upon completion of cable installation.
Warning: Use of non certified “techs” note: Service warranties may be void if a
non-Life
Fitness-certified technician
performs service work. Replacement of any strength cables should be performed by a
Life
Fitness certified technician.
CABLE COMPONENTS
| Item | Description | Qty. |
|---|---|---|
| 1 | Cable Assembly | 1 |
| 2 | Cable Hangtag | 1 |
| 3 | Jam Nut | 1 |
| 4 | Head Plate Assembly | 1 |
| 5 | Weight Plates | 12 |
| 6 | Weight Selector Pin Assembly | 1 |
- Jam nuts must be tightened toward the head plate assembly and frame anchor. Torque the jam nuts to 20-25 ft-lbs. (27.2 - 24.0 Nm).
- Cable Hangtags to be removed by customer only.