Picture Menu
- Press MENU button to display the main menu.
- Press
/ 
button to select PICTURE in the main menu.
- Press
/ 
button to select the option that you want to adjust in the PICTURE
menu. - Press OK button to adjust.
- After finishing your adjustment, Press MENU button to save and return back to the previous menu.
Picture Mode
You can change the value of contrast, brightness, color, sharpness and tint when the picture is in Personal mode.
Tip: You can press PMODE button to change the
Picture Mode directly.
Contrast/ Brightness/ Color/ Tint / Sharpness
Press
/
button to select option, then press
/ button to adjust.
- Contrast
- Adjust the highlight intensity of the picture, but the shadow of the picture is invariable.
- Brightness
- Adjust the optical fiber output of the entire picture, it will effect the dark region of the picture.
- Color
- Adjust the saturation of the color based on your own like.
- Tint
- Use in compensating color changed with the transmission in the NTSC code.
- Sharpness
- Adjust the peaking in the detail of the picture.
Color Temp
Change the overall color cast of the picture.
- Press /
button to select Color Temperature , then press OK button to enter
sub-menu.
- Press / button to select. (Available Picture mode: Cold,
Normal, Warm).
- Cold
- Increase the blue tone for the white.
- Normal
- Default color temperature.
- Warm
- Increase the red color for the white.
Noise Reduction
To filter out and reduces the image noise and improve picture quality.
- Off
- Select to turn off video noise detection.
- Low
- Detect and reduce low video noise.
- Middle
- Detect and reduce moderate video noise.
- High
- Detect and reduce enhanced video noise.
- Default
- Set as Default.