Install Console Back Shroud

  1. Insert grommets into two holes in back of console weldment.
  2. Push clips on top of console back shroud into corresponding slots on console weldment.
  3. Install screws securing console back shroud to console weldment using a Phillips screwdriver.
    Item Description Qty.
    1 Console Back Shroud 1
    2 Console Weldment 1
    3 Grommet 2
    4 Screw, M4.2 x 0.7 6G6G x 19, DIN, PHL, PAN, AB, ST, ZB 2

    Tighten hardware to 13 in-lb / 1.5 Nm.

Parent topic: Assembly Procedure