Install Console: SL or SE4

  1. Install screws securing console to console support weldment using a Phillips screwdriver.
    Note: Use the hook on top of the console support weldment to aid in console installation.

    SL Console

    Item Description Qty.
    1 SL Console 1
    2 Console Support Weldment 1
    3 Screw, M5 x 0.8 x 14, PHL, PAN, MS, ST, ZN 5

    Tighten hardware to 16.8 in-lb / 1.9 Nm.

    SE4 Console

    Note: Do not install the screw in the location shown (next to arrow) if the SE4 console has a Set Top Box Sync (STB) receiver! The screw will hit the STB receiver inside of the console.
    Item Description Qty.
    1 SE4 Console 1
    2 Console Support Weldment 1
    3 Screw, M5 x 0.8 x 14, PHL, PAN, MS, ST, ZN 4

    Tighten hardware to 16.8 in-lb / 1.9 Nm.

Parent topic: Assembly Procedure