Tighten Hardware

Tighten all loose hardware to 20-25 ft-lb / 27-34 Nm in the following order:
  1. Footboard crossmember assembly to side frames assemblies.
  2. Footboard assembly to side frames assemblies.
  3. Hard stop crossmember assembly to side frames assemblies.
  4. Fins to side frames.
  5. Weight horns to fins.
  6. Crossmember weldment to side frames assemblies.
  7. Crossmember assembly with bumpers to side frames assemblies.
  8. Workarm assembly to side frames assemblies.
  9. Carriage assembly to workarm assembly.
  10. Rack-out assembly to carriage assembly.
Parent topic: Assembly Procedure