Maintenance Schedule
| ACTION | DAILY | WEEKLY | MONTHLY | AS NEEDED |
|---|---|---|---|---|
| CLEAN | ||||
| Upholstery | ✓ | |||
| Hand Grips | ✓ | |||
| WAX | ||||
| Frames | ✓ | |||
| INSPECT | ||||
| Paint | ✓ | |||
| Hardware | ✓ | |||
| Frame | ✓ | |||
| Hand Grips | ✓ | |||
Clean
- Upholstery with an approved or compatible cleaner.
- Hand grips with an approved or compatible cleaner.
Wax
- Frames with a standard, non-abrasive, wax finish.
Inspect
- Hardware. Check for loosening. Tighten as required.
- Frames. Inspect for wear and damage.
- Hand grips. Check for wear and damage.
- For paint chips. Fill in immediately with manufacturers touch-up paint.
Once a Day
- Wipe down upholstery with a mild soap and water or comparable all purpose cleaner.
Once a Week
- Visually inspect all hardware for loosening, tampering or wear.
- Check condition of hand grips.
Once a Month
- Inspect hardware on all machines and tighten any bolts or nuts that may have loosened over the life of the product.
Notes
- Use polishing compound (such as car wax) and remove shoe scuffs from powder coated surfaces as necessary.
Approved and Compatible Cleaners
Two preferred cleaners have been approved by reliability experts: PureGreen 24 and Gym Wipes. Both cleaners will safely and effectively remove dirt, grime and sweat from equipment. PureGreen 24 and the Antibacterial Force formula of Gym Wipes are both disinfectants that are effective against MRSA and H1N1.
PureGreen 24 is available in a spray which is convenient to use. Apply the spray to a microfiber cloth and wipe down the equipment. Use PureGreen 24 on the equipment for at least 2 minutes for general disinfection purposes and at least 10 minutes for fungus and viral control.
Gym Wipes are large, durable pre-moistened wipes to use on the equipment before and after workouts. Use Gym Wipes on the equipment for at least 2 minutes for general disinfection purposes.
Contact Customer Support Services to order these cleaners (1-800-351-3737 or email: customersupport@lifefitness.com).
Mild soap and water or a mild non-abrasive household cleaner can also be used to clean the display and all exterior surfaces. Use a soft microfiber cloth only. Apply the cleaner to the microfiber cloth before cleaning. DO NOT use ammonia or acid based cleaners. DO NOT use abrasive cleaners. DO NOT use paper towels. DO NOT apply cleaners directly to the equipment surfaces.
Removal of Paint, Marking Pens, or Labels
- Butyl cellosolve works well for removal of paints, marking pen inks, lipstick, etc.
- Labels, stickers, etc. may be removed using kerosene. When the solvent will not penetrate sticker material, apply heat (hair dryer) to soften the adhesive and promote removal. GASOLINE SHOULD NOT BE USED.