Assemble Frame

Install bolts, washers and hex nuts securing rear support to base frame and tighten to 20-25 ft-lbs (27-33 Nm). Then gently tap in hole plugs.

Item	Description	Qty.
1	Base Frame	1
2	Rear Support	1
3	M10 Hex Nylock Nut	2
4	3/8" Flat Washer	2
5	M10 x 25mm Bolt	2
6	Hole Plug	2

Install bolts, washers and hex nuts securing front support to front upright and tighten to 20-25 ft-lbs (27-33 Nm). Then gently tap in hole plugs.

Item	Description	Qty.
1	Front Upright	1
2	Front Support	1
3	3/8" Flat Washer	2
4	M10 Hex Nylock Nut	2
5	M10 x 25mm Bolt	2
6	Hole Plug	2

Install bolts, washers and hex nuts securing front upright to base frame and tighten to 20-25 ft-lbs (27-33 Nm). Then gently tap in hole plugs.

Item	Description	Qty.
1	Base Frame	1
2	Front Upright	1
3	M10 x 25mm Bolt	2
4	3/8" Flat Washer	2
5	M10 Hex Nylock Nut	2
6	Hole Plug	2

Install bolts, washers and pivot shaft securing seat frame to base frame and tighten to 20-25 ft-lbs (27-33 Nm).

Item	Description	Qty.
1	Base Frame	1
2	Seat Frame	1
3	Pivot Shaft	1
4	3/8" Type A Flat Washer	2
5	M10 x 25mm Bolt	2

Note: The pivot shaft has a flat end that aligns with the flat end on the pivot bracket.

Place the handle through the wrist strap loop. Install bolts, washers and hex nuts securing handle to front upright and tighten to 20-25 ft-lbs (27-33 Nm).

Item	Description	Qty.
1	Front Upright	1
2	Handle	1
3	Wrist Strap	1
4	M10 x 60mm Bolt	2
5	3/8" Flat Washer	4
6	M10 Hex Nylock Nut	2

Pull wrist strap loop up and fold it over the handle, then place placard plate through wrist strap. Install bolts, washers, and hex nuts securing placard plate to handle and tighten to 20-25 ft-lbs (27-33 Nm).

Item	Description	Qty.
1	Placard Plate	1
2	Handle	1
3	Wrist Strap	1
4	3/8" Flat Washer	4
5	M10 Hex Nylock Nut	2
6	M10 x 25mm Bolt	2

Note: Finished wrist strap appearance.

Life Fitness Flexibility Stretch