Install Custom Sign

The super duty crossmember is required to install the custom sign.
  1. Install screws, washers, spacers, and lock nuts securing optional custom sign and backer plate to super duty crossmember using a 7mm Allen wrench and 17mm wrench.
    Note: Single custom sign can be installed on the front or rear of super duty crossmember.

    Single Custom Sign

    Double Custom Sign

    Item Description Qty.
    1 Super Duty Crossmember 1
    2 Custom Sign 1 or 2
    3 Backer Plate 1 or 2
    4 Screw, M10 x 1.5, 25mm 2
    5 Screw, M10 x 1.5, 30mm 2
    6 Screw, M10 x 1.5, 35mm 4
    7 Flat Washer, 3/8" 8
    8 Lock Nut, M10 4
    9 Spacer 2

    Tighten hardware to 40-50 in-lb (4.5-5.6 Nm).

Parent topic: Assembly