Component and Hardware List

Item	Description	Qty.
1	Tower Frame	1
2	Guide Rod	2
3	Increment Weight Guide Rod	2
4	Rear Shroud	1
5	Label, Weight Stack	1
6	Tube Cap	2
7	Top Cap	1

Item	Description	Qty.
1	Tower Hardware Kit, CI-HAA	1
2	Hole Plug, 8.7 mm	2
3	Grommet	2
4	Shroud Retainer	14
5	Bushing	4
6	Screw, 8 x ¾" Phillips	2
7	Screw, M10 x 1.5, 50mm	1
8	Screw, M10 x 1.5, 55mm	2
9	Nut, ¼" Nylock	2
10	Nut, M10 x 1.5, Hex Nylock	3
11	Washer, Flat ¼" ID	2
12	Washer, Flat 3/8"	6
13	Weight Stack Cushion	2
14	Increment Weight Bumper	1
15	Spring	2
16	Guide Rod Housing	2
17	Pulley, 3.5" OD	1
18	Pulley, 4.5" OD	2

Item	Description	Qty.
1	Front Shroud, Left	1
2	Front Shroud, Right	1
3	Bottom Cap	1

Item	Description	Qty.
1	Front Shroud Hardware Kit	1
2	Screw, M4.2 x 0.7, Phillips	6
3	Screw, M10 x 1.5, 20mm	2
4	Washer, Flat 3/8"	2
5	Grommet, Shroud Retainer	6

Item	Description	Qty.
1	Base Frame Assembly	1
2	Back Pad Weldment	1
2	Leg Pad Weldment	2
3	Back Pad	1
4	Seat Pad	1
5	Leg Pad	2
6	Front Cap	1
7	Cable	1
8	Head Plate Assembly	1
9	Increment Weight Assembly	1
10	Multilingual Label Sheet	1
11	Weight Stack (Weight Plates)	1 (8)

Item	Description	Qty.
1	Hardware Kit, OP-HAA	1
2	Nut, M10 x 1.5, Hex Nylock	4
3	Nut, M16 Hex Jam	1
4	Washer, Flat 3/8"	14
5	Washer, Fender 3/8"	2
6	Screw, M6, HCS, 50mm	4
7	Screw, M10 x 1.5, 35mm Flat Head	4
8	Screw, M10 x 1.5, 20mm	3
9	Screw, M10 x 1.5, 30mm	2
10	Screw, M10 x 1.5, 70mm	4
11	Screw, M10 x 1.5, 90mm	2
12	Hole Plug, 1"	4
13	Increment Weight Cap, LBS	1
14	Increment Weight Cap, KG	1