Install Cam

  1. Install cable clip securing the cable to the cam.
    Item Description Qty.
    1 Cable Clip 1
    2 Cable 1
    3 Cam 1
  2. Slide cam up into the bracket on the work arm assembly.
  3. Install screws, washers, and locknuts securing the cam to the work arm assembly using an 8mm Allen wrench and a 17mm wrench.
    Item Description Qty.
    1 Cam 1
    2 Work Arm Assembly 1
    3 Screw, M10 x 1.5, 50mm 3
    4 Washer, Flat 3/8" 6
    5 Nut, M10 x 1.5, Hex Nylock 3

    Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).

Parent topic: Assembly Procedure