Install Back and Seat Pads

  1. Install screws and washers securing the chest pad to the main frame using an 8mm Allen wrench.
    Item Description Qty.
    1 Chest Pad 1
    2 Main Frame 1
    3 Washer, Flat 3/8" 3
    4 Screw, M10 x 1.5, 30mm 3
    5 Hole Plug, 1" 3

    Tighten hardware to 40-50 in-lb (4.5-5.6 Nm).

  2. Install hole plugs to main frame using a rubber mallet.
  3. Install screws and washers securing the seat pad to the main frame using an 8mm Allen wrench.
    Item Description Qty.
    1 Seat Pad 1
    2 Main Frame 1
    3 Washer, Flat 3/8" 3
    4 Screw, M10 x 1.5, 30mm 3
    5 Hole Plug, 1" 3

    Tighten hardware to 40-50 in-lb (4.5-5.6 Nm).

  4. Install hole plugs to main frame using a rubber mallet.
Parent topic: Assembly Procedure