Install Work Arm Assembly

  1. Slide long spacer, pivot shaft, ball bearings, and short spacers into the bearing housing on the work arm assembly.
  2. Align work arm assembly with the main frame.
  3. Install screws and washers securing the work arm assembly to the main frame using an 8mm Allen wrench.
    Item Description Qty.
    1 Work Arm Assembly 1
    2 Main Frame 1
    3 Long Spacer 1
    4 Ball Bearing 2
    5 Short Spacer 2
    6 Pivot Shaft 1
    7 Screw, M10 x 1.5, 30mm 2
    8 Washer, Flat 3/8" 2

    Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).

Parent topic: Assembly Procedure