Assemble Frame Components

  1. Install screws, washers, and locknuts securing the bottom cross brace to the main frame using an 8mm Allen wrench and a 17mm wrench.
    Item Description Qty.
    1 Bottom Cross Brace 1
    2 Main Frame 1
    3 Screw, M10 x 1.5, 120mm 2
    4 Washer, Flat 3/8" 4
    5 Nut, M10 x 1.5, Hex Nylock 2

    Hand tighten hardware.

  2. Install screws, washers, and locknuts securing the tower to the bottom cross brace using an 8mm Allen wrench and a 17mm wrench.
    Item Description Qty.
    1 Tower Frame 1
    2 Bottom Cross Brace 1
    3 Screw, M10 x 1.5, 110mm 2
    4 Washer, Flat 3/8" 4
    5 Nut, M10 x 1.5, Hex Nylock 2
    6 Hole Plug, ½" 2

    Hand tighten hardware.

  3. Install hole plugs to the tower.
  4. Install screws, washers, and locknuts securing the pulley tree to the bottom cross brace using an 8mm Allen wrench and a 17mm wrench.
    Item Description Qty.
    1 Pulley Tree 1
    2 Bottom Cross Brace 1
    3 Screw, M10 x 1.5, 90mm 2
    4 Washer, Flat 3/8" 4
    5 Nut, M10 x 1.5, Hex Nylock 2

    Hand tighten hardware.

  5. Install screws, washers, and locknuts securing the top cross brace to the main frame using an 8mm Allen wrench and a 17mm wrench.
    Item Description Qty.
    1 Top Cross Brace 1
    2 Main Frame 1
    3 Screw, M10 x 1.5, 120mm 2
    4 Washer, Flat 3/8" 4
    5 Nut, M10 x 1.5, Hex Nylock 2

    Hand tighten hardware.

  6. Install screws, washers, and locknuts securing the top cross brace to the pulley tree using an 8mm Allen wrench and a 17mm wrench.
    Item Description Qty.
    1 Top Cross Brace 1
    2 Pulley Tree 1
    3 Screw, M10 x 1.5, 90mm 2
    4 Washer, Flat 3/8" 4
    5 Nut, M10 x 1.5, Hex Nylock 2

    Hand tighten hardware.

  7. Install screws and washers securing the top cross brace to the tower using an 8mm Allen wrench and a 17mm wrench.
    Item Description Qty.
    1 Top Cross Brace 1
    2 Tower Frame 1
    3 Screw, M10 x 1.5, 25mm 4
    4 Washer, Flat 3/8" 4

    Hand tighten hardware.

  8. Tighten all the hardware from Steps 1-7 to 20-25 ft-lb (27.1-33.9 Nm).
Parent topic: Assembly Procedure