Component and Hardware List

Item	Description	Qty.
1	Tower Frame	1
2	Guide Rod	2
3	Increment Weight Guide Rod	2
4	Rear Shroud	1
5	Label, Weight Stack	1
6	Tube Cap	2
7	Top Cap	1

Item	Description	Qty.
1	Tower Hardware Kit, OP-LCE	1
2	Hole Plug, 8.7 mm	2
3	Hole Plug, ½"	2
4	Grommet	2
5	Shroud Retainer	14
6	Bushing	4
7	Screw, 8 x ¾" Phillips	2
8	Screw, M10 x 1.5, 55mm	2
9	Nut, M10 x 1.5, Hex Nylock	2
10	Nut, ¼" Nylock	2
11	Washer, Flat ¼" ID	2
12	Washer, Flat 3/8" ID	4
13	Weight Stack Cushion	2
14	Increment Weight Bumper	1
15	Spring	2
16	Guide Rod Housing	2
17	Pulley, 3.5" OD	1
18	Pulley, 4.5" OD	1

Item	Description	Qty.
1	Front Shroud, Left	1
2	Front Shroud, Right	1
3	Bottom Cap	1

Item	Description	Qty.
1	Front Shroud Hardware Kit	1
2	Screw, M4.2 x 0.7, Phillips	6
3	Screw, M10 x 1.5, 20mm	2
4	Washer, Flat 3/8"	2
5	Grommet, Shroud Retainer	6

Item	Description	Qty.
1	Main Frame	1
2	Seat Frame	1
3	Bottom Cross Brace	1
4	Front Cross Brace	1
5	Lower Pulley Assembly	1
6	Work Arm Assembly	1
7	Leg Curl Assembly	1
8	Leg Extension Assembly	1
9	Cam	1
10	Back Pad	1
11	Seat Pad	1
12	Roller Pad	4
13	Front Cap	1
14	Multilingual Label Sheet	1
15	Cable	1
16	Increment Weight Assembly	1
17	Head Plate Assembly	1
18	Weight Stack (Weight Plates)	1 (12)

Item	Description	Qty.
1	Hardware Kit, OP-LCE	1
2	Nut, M10 x 1.5, Hex Nylock	7
3	Nut, M10 x 1.5, Hex Jam	3
4	Nut, M16, Hex Jam	1
5	Washer, Flat 3/8"	36
6	Screw, M5 x 10, Phillips	4
7	Screw, M6, HCS, 50mm	4
8	Screw, M10 x 1.5, 25mm, Flat Head	2
9	Screw, M10 x 1.5, 25mm	10
10	Screw, M10 x 1.5, 30mm	11
11	Screw, M10 x 1.5, 40mm, Low Head	3
12	Screw, M10 x 1.5, 70mm	1
13	Screw, M10 x 1.5, 100mm	1
14	Screw, M10 x 1.5, 110mm	2
15	Screw, M10 x 1.5, 120mm	2
16	Increment Weight Cap, LBS	1
17	Increment Weight Cap, KG	1
18	Cable Clip	1
19	Hole Plug, 1"	1
20	Spacer, .344"	2
21	Roller Pad Plate	4
22	Bearing Housing Cap	4
23	Shaft Collar	4
24	Kicker Stop	1
25	Work Arm Stop	1
26	Pivot Shaft, 25mm	1
27	Pivot Shaft, 19mm	1