Install Frame Bottom Option

Install Frame Bottom Option (if equipped):
  1. Standard S180: Loosely install Frame Bottom Option components and hardware (Weight Plate Storage can be orientated on Left or Right side of frame).
    Item Description Qty.
    1 Socket Nut 4
    2 1/4" Spacer 4
    3 Retainer 4
    4 M10 X 80mm Bolt 4
    5 Weight Plate Storage (right shown) 1
    6 M10 X 60mm Bolt 2
    7 Power Pivot Elbow 1
    Note: If nesting Weight Plate Storage on shelf, use M10 X 85mm Bolts.

    Standard S180:

    Item Description Qty.
    1 Socket Nut 2
    2 1/4" Spacer 2
    3 Retainer 2
    4 M10 X 85mm Bolt 2
    5 Weight Plate Storage 1
    6 Shelf Option 1

    AFS equipped S180:

    Item Description Qty.
    1 M10 X 20mm Bolt 1
    2 M10 X 60mm Bolt 1
    3 Retainer 3
    4 1/4" Spacer 2
    5 AFS Stability Leg 1
    6 Lower Mount Plate 1
    7 Power Pivot Elbow 1
    8 Socket Nut 3
    9 M10 X 65mm Bolt 1
  2. Loosely install Power Pivot bar holder and hardware.
    Item Description Qty.
    1 Socket Nut 2
    2 1/4" Spacer 2
    3 Bar Holder 1
    4 Retainer 2
    5 M10 X 60mm Bolt 2

    AFS equipped S180:

    Item Description Qty.
    1 Socket Nut 4
    2 1/4" Spacer 2
    3 S180 Upright 1
    4 Upper Mount Plate 1
    5 Retainer 4
    6 M10 X 60mm Bolt 2
    7 Bar Holder 1
    8 M10 X 20mm Bolt 2
  3. Assemble Weight Bar.
    Item Description Qty.
    1 Weight Bar Assembly 1
    2 M10 X 60mm Bolt 1
    3 Retainer 1
    4 Concave Washer 2
    5 Socket Nut 1
    6 Power Pivot Elbow 1
  4. Store Power Pivot Bar:
    Raise bar and place into stored position.
    Note: Bar will not sit down directly into grooves when used with AFS.
  5. For Battle Rope Anchor:
    Standard S180: Loosely install Battle Rope Anchor and hardware.
    Item Description Qty.
    1 Socket Nut 2
    2 1/4" Spacer 2
    3 Battle Rope Anchor 1
    4 Retainer 2
    5 M10 X 55mm Bolt 2

    AFS equipped S180:

    Item Description Qty.
    1 Socket Nut 1
    2 1/4" Spacer 2
    3 AFS Stability Leg 1
    4 Battle Rope Anchor 1
    5 Retainer 2
    6 M10 X 55mm Bolt 2
Parent topic: Assembly Procedure