Pullout Force
Life Fitness specifies Hilti™ static and dynamic anchors. According to the anchor manufacturer, the recommended design pullout force (in tension) for the specified anchors, when properly installed in cracked concrete, is provided in the side table. This table should be used for reference only; for additional and up-to-date information on the anchor capabilities or the design pullout force in other substrates, please consult Hilti directly at https://www.us.hilti.com.
| Dynamic Anchors | Design Resistance in Tension * |
|---|---|
| KB-TZ2 3/8" x 5” and HST3 10mm x 130mm | Greater than 2,000 lb (2.7kN) |
| Static Anchors | Design Resistance in Tension * |
|---|---|
| KH-EZ 1/4” | 830 lb (3.6 kN) |
| HUS-H 6mm | 3.3 kN (741lb) |
* Design strength extracted from the Hilti™ Anchor Fastening Technology Manual.