Power Cord Routing
Warning: Make sure the power cord is
unplugged before attempting to route it around or through the treadmill.
Connect the power cord to the power receptacle in the front of the treadmill. The power cord can be run to the user-front left or right sides depending on installation / site needs.
Note: To accommodate treadmill incline, at least 2 ft. (24”)
of power cord is required between the outlet and the last power cord clip for outlets
in
front of the treadmill.
Warning: Keep the area 6.5 ft. / 2 m by 3
ft. / 0.9 m behind the treadmill clear of any obstructions, including walls,
furniture, and other equipment. Contact Customer Support Services for an optional
longer power cord if necessary.
Danger: Ensure that the power cord
does not contact the striding belt or get pinched between the frame, lift arm or
under the wheels; failure to follow this warning may result in serious
injury.
Danger: Assurez-vous que le cordon d’alimentation n’entre pas en contact avec le tapis et
qu’il n’est pas pincé entre le cadre, le bras de levage ou sous les roues. Le non-respect
de cet avertissement peut provoquer de graves blessures.
