Attaching Extended Handrails

  1. Caution: Failure to place the machine on a stable/level surface may result in injury to yourself or others.
    Level the machine by rotating the front and rear tube end caps.
  2. Starting on the left side, use a 7/32" Allen hex bit to remove two 3/8-16 x .75 socket screws on the upper handlebar weldment.
  3. Place the easy access platform onto the rear cross tube.
  4. Position the platform so the telerails are centered between the openings.
  5. Insert the rear end of the left handrail into the hole opening of the platform using a back and forth motion.
  6. Align the other end of the handrail with the mounting holes of the upper handlebar weldment arm.
  7. Loosely reinsert the socket screws removed previously in step 2.
  8. Repeat steps 5 thru 7 for the right handlebar.
  9. Tighten both left and right handlebar screws. ASSEMBLY COMPLETE
Parent topic: Assembly