Attach Main Body To Base Frame

Attention: The main body and base frame assembly should be done without the seat assembly mounted on the unit for easier handling, bodily injury prevention and damage to the frame. This section only explains the assembly of the main body and base frame.
Attention: TWO PEOPLE REQUIRED

Tools Required:

  • Torque Wrench Set At 48 ft-lbs (65Nm)
  • 12" (30.5 cm) Center Punch (Qty. 2)
  • 12" (30.5cm) Ratchet Extension
  • 5/16" (8mm) Allen Hex Bit
Component
Base Frame Main Body Shims
Qty. 1 Qty. 1 Qty. 2
Hardware
Washer, Flat, 3/8" Washer, Split, 3/8" Screw, 3/8"-16 x 1", Socket
Qty. 4 Qty. 4 Qty. 4
Note: Verify the shims are between the mast and the base frame when installing in step 1.

Parent topic: Assembly