• Life Fitness does not warrant nor guarantee that component parts used in the manufacture of products offered under the Life Fitness brand are latex-free. Users of these products must take all necessary precautions to prevent accidental contact that could lead to an adverse latex reaction.
• Read all warnings and instructions on each product prior to using your exercise machine.
• If warnings are missing or damaged, please contact customer service immediately for replacement warning labels. Warning labels are shipped with every product and should be installed before the product is used. SCIFIT is not responsible for missing or damaged warning labels.
• Use the exercise machine only for its intended purposes as described in this manual. Do not use attachments not recommended by the manufacturer.
• Never insert objects into any opening in these products. If an object should drop inside, turn off the power switch on machine, disconnect the power cord from the electrical outlet, and carefully retrieve it. If the item cannot be reached, contact customer support services..
• This machine is intended for indoor use only. Do not place in direct sunlight, high humidity or where water is present (i.e. pool or spa areas).
• This machine is not intended for use by persons with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the machine by a person responsible for their safety. Keep children under the age of 14 away from this machine.
• Never operate the machine with the air openings blocked. Keep air openings free of lint, hair, or any other obstructing material.
• Never place liquids of any type directly on the unit, except in an accessory tray or holder. Containers with lids are recommended. Do not use this machine in bare feet. Always wear shoes. Wear shoes with rubber or high-traction soles. Do not use shoes with heels, leather soles, cleats or spikes. Make sure no stones are embedded in the soles.
• Keep all loose clothing, shoelaces, and towels away from moving parts.
• Do not reach into, or underneath, the unit or tip it on its side during operation.
• Do not allow other people to interfere in any way with the user or equipment during a workout.
• When the product is not in use, SCIFIT recommends unplugging the product. Disconnect from the electrical outlet when not in use, and before putting on or taking off parts. To disconnect, turn power OFF at the ON/OFF switch, then remove plug from electrical outlet.
• Free standing equipment shall be installed on a stable and leveled surface.
• Do not stand or sit on plastic shrouds.
• Never operate the exercise machine if it has a damaged electrical power cord or plug, not working properly, or even immersed in water. Contact customer service.
• Keep the power cord away from heated surfaces. Do not pull the equipment by the power cord or use the cord as a handle. Do not run the power cord on the floor under or along the side of the treadmill.
• Do not use this product in areas where aerosol spray products are being used or where oxygen is being administered. Such substances create the danger of combustion and explosion.
• Position the product so that the power cord plug to the wall is accessible to the user. Make sure that the power cord is not knotted or twisted and that it is not trapped under any equipment or other objects.
• If the electrical supply cord is damaged, it must be replaced by the manufacturer, an authorized service agent, or a similarly qualified person to avoid a hazard.
• Never mount or dismount the treadmill while the running belt is moving. Use the handrails whenever additional stability is required. In case of an emergency, such as tripping, grasp the handrails and place the feet on the side platforms
• In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated product, nor should a means for grounding be added to the product, Servicing a double-insulated product requires extreme car and knowledge of the system, and should be done only by qualified service personnel. Replacement parts for a double-insulated product must be identical to the parts they replace. A double-insulated product is marked with the words "DOUBLE INSULATION" or " DOUBLE INSULATED" and the symbol image.

SAVE THESE INSTRUCTIONS

The serial number label and the power cord are located at the front of the machine.

Option 1: Attach the tether clip to your clothing. The E-Stop magnet will release when the tether is over extended.

Option 2: Press the [STOP] button on the E-Stop module.

Step 1: Press [Quick Start] button on the console and increase the elevation to 7%.

Step 2: Turn off the machine, then unplug the power cord from the wall outlet.

Tools required:

• Level
• Cresent Wrenches (Qty. 2)

Step 1: Place the level on top of the treadmill side rail.

Step 2: Use the cresent wrenches to loosen the height adjustment nut (item 1) and jam nut (item 2) on both right and left footpads.

Step 3: Lift and stabilize the rear of the treadmill until the machine is level (see bubble on the level), then adjust the right and left footpads until they touch the floor.

Step 4: Move the height adjustment nut back up to the top of the threads followed by the jam nut on both footpads, then tighten with the cresent wrenches.

Step 1: Press the [Quick Start] button and increase the speed to 2 mph (3.2 km/h).

Step 2:

* If belt tracks to the left, insert the T-handle into the left end cap and turn clockwise 1/4 at a time to move the belt to the right.

* If belt tracks to the right, insert the T-handle into the right end cap and turn clockwise 1/4 at a time to move the belt to the left.

Step 3: When the belt tracking is consistent, then increase the speed to 5 mph (8 km/h) and adjust the belt if needed according to step2.

Step 1: Mount the treadmill and place your feet on the side rails straddling the machine, then press the [Quick Start] button.

Step 2: Increase the speed to 3 mph (4.8 km/h), then grab hold of the handrails and begin to walk.

Step 3: Stomp your foot in front of the motor cover. If the belt slips return to the "Belt Alignment/Tension" section.

Step 1: Access the test screen by pressing in sequence the [Stop], then [Five Dot], then [One Dot] and finally the [Two Dot] buttons.

Step 2: Standing off of the machine press the elevation [Up Arrow] and [Down Arrow] buttons at the same time, this will highlight the "POT" category yellow and the calibration process will begin.

Step 3: When the calibration is complete, the "POT" category will unhighlight. You may now exit by pressing and holding the [One Dot] button, then press the [Stop] button, then release both buttons. The screen will then change to the main menu.

External Parts

Internal Parts

Safety Perimeter

This Life Fitness commercial exercise equipment product is warranted to be free of all defects in material and workmanship.

The original purchaser or any person receiving the product as a gift from the original purchaser.

All coverage is provided by specific Product according to the guidelines listed on the chart below.

If the Product or any covered part must be returned to a service facility for repairs, We, Life Fitness , will pay all transportation and insurance charges for the first year. You are responsible for transportation and insurance charge after the first year.

We will ship to you any new or rebuilt replacement part or component, or at our option, replace the Product. Such replacement parts are warranted for the remaining portion of the original warranty period.

Any failures or damage caused by unauthorized service, misuse, accident, negligence, improper assembly or installation, debris resulting from any construction activities in the Product’s environment, rust or corrosion as a result of the Product’s location, alterations or modifications without our written authorization or by failure on your part to use, operate and maintain the Product as set out in your Operation Manual (“Manual”).

One type RJ45 interchangeable Network ready and Fitness Entertainment port is supplied with the Product. This port complies with the FitLinxx CSAFE specification dated August 4, 2004 stating: 4.75 VDC to 10 VDC; maximum current of 85 mA. Any Product damage caused by a load exceeding this FitLinxx CSAFE specification is not covered by warranty.

All terms of this warranty are void if this product is moved beyond the continental borders of the United States of America (excluding Alaska, Hawaii and Canada) and are then subject to the terms provided by that country’s local authorized Life Fitness representative.

Register your Product online at http://www.scifit.com/warranty-registration-2/.

Retain proof of purchase; use, operate and maintain the Product as specified in the Manual; notify Customer Support Services of any defect within 10 days after discovery of the defect; if instructed, return any defective part for replacement or, if necessary, the entire Product for repair.

Refer to the front of this manual for your local service contact information. Reference your name, address and the serial number of your Product. They will tell you how to get a replacement part, or, if necessary, arrange for service where your Product is located.

THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR PART. We neither assume nor authorize any person to assure for us any other obligation or liability concerning the sale of this Product. Under no circumstances shall we be liable under this warranty, or otherwise, of any damage to any person or property, including any lost profits or lost savings, for any special, indirect, secondary, incidental or consequential damages of any nature arising out of the use of or inability to use this Product. Some states do not allow the exclusion or limitation of implied warranties or of liability for incidental or consequential damages, so the above limitations or exclusions may not apply to you. Warranty coverages and terms may differ outside the United States. Please contact the Life Fitness office servicing your country (contact information found at the front of this manual) or visit the applicable local Life Fitness website to receive the specific warranty information for your country.

No one is authorized to change, modify or extend the terms of this limited warranty.

This warranty gives you specific legal rights, and you may have other rights which vary from state to state and country by country.