Inspect Belts

Inspect all belts for wear or damage and proper tension. When inspecting belts, run fingers on the belt, paying particular attention to bends and attachment points.

The following conditions may indicate a worn belt:

Condition of Belt	3D View	3D or Side View
Peeling of the belt’s skin.
Wave in belt
Belt is necked down (narrow section)	Replace belt if any section is over 1/32” (.03) narrower than the rest of belt	Examine edge of belt (both sides). Replace belt if any section is narrower than the rest.
Cracks or splits
One or more strands of belt is hanging out, or if there is a significant amount of frayed belt.